Both the M1010 (ambulance) and M1031 (contact maintenance) took ~$100 to repaint, and that was only because it required brown and black.
You could very easily have a nice flat OD paint job on a YJ/TJ and spend less than $50....
_________________ NO DISASSEMBLE!
Thomas Paine wrote:
"He that would make his own liberty secure, must guard even his enemy from oppression; for if he violates this duty, he establishes a precedent that will reach to himself."
Sun Sep 10, 2017 8:23 pm
AR15L
Site Supporter
Location: Nampa, Idaho Joined: Thu Mar 17, 2011 Posts: 19462
Real Name: Rick
I found one. 1999 - under 200K Sport model - good interior - sailed thru emissions - cruise - pwr everything. One or two dents if you catch it in the right light. No clear coat peeling. Needs tires, shocks, windshield. Tires & shocks were probably going to be done on whatever I bought so I already planned on it. Plus it knocked the price down. These are unwashed, as is pictures.
Attachment:
rsz_20170921_140550.jpg
Attachment:
rsz_1rsz_20170921_140523.jpg
You do not have the required permissions to view the files attached to this post.
_________________ ‘What’s the point of being a citizen if an illegal gets all the benefits’
Fri Sep 22, 2017 4:08 pm
PAPISJEEP
Site Supporter
Location: lewis county Joined: Sat Apr 30, 2011 Posts: 1777
I will second that.. I used it on lightbars, and other agencies lenses got yellowed and cracked while the ones I protected with 303 looked like new....
If you polish headlights to get rid of the haze, 303 will prevent it from getting hazy again.
_________________ NO DISASSEMBLE!
Thomas Paine wrote:
"He that would make his own liberty secure, must guard even his enemy from oppression; for if he violates this duty, he establishes a precedent that will reach to himself."
Fri Sep 22, 2017 6:59 pm
jukk0u
Site Supporter
Location: Lynnwood and at large Joined: Wed May 1, 2013 Posts: 21260
Real Name: Vick Lagina
Time to take a sawzall to the fenders, get some 31's, ditch the stablizer bar, put a skjacker 6" lift and some longer control arms on it. Install a front receiver and wiring for the winch (run winch wiring to the rear receiver so you can pull yourself OUT of trouble, too).
_________________ “Finding ‘common ground’ with the thinking of evil men is a fool’s errand” ~ Herschel Smith
"The said Constitution shall never be construed to authorize Congress to prevent the people of the United States who are peaceable citizens from keeping their own arms." ~ Samuel Adams
“A return to First Principles in a Republic is sometimes caused by simple virtues of a single man. His good example has such an influence that the good men strive to imitate him, and the wicked are ashamed to lead a life so contrary to his example. Before all else, be armed!” ~ Niccolo Machiavelli
Láodòng zhèng zhūwèi zìyóu
FJB
Fri Sep 22, 2017 7:28 pm
mcyclonegt
Site Supporter
Location: West Olympia Joined: Mon May 28, 2012 Posts: 6817
Real Name: Matt
I found a very clean 94 on the lemon pot on mcchord for 4500. I'll post pictures and info when I can downsize them.
I only saw two for sale on that web site.
I never did post up the pictures. I saw it in person, didn't know they had a website.
_________________ "I'm Hub McCann. I've fought in two World Wars and countless smaller ones on three continents. I led thousands of men into battle with everything from horses and swords to artillery and TANKS! I've seen the headwaters of the Nile, and tribes of natives no white man had ever seen before. I've won and lost a dozen fortunes, KILLED MANY MEN! And loved only one woman, with a passion a FLEA like you could never begin to understand. That's who I am. NOW, GO HOME, BOY!"
"I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones". Albert Einstein 1947
Fri Sep 22, 2017 7:48 pm
Rix86
Site Supporter
Location: Shelton Joined: Sun Nov 17, 2013 Posts: 5838
Time to take a sawzall to the fenders, get some 31's, ditch the stablizer bar, put a skjacker 6" lift and some longer control arms on it. Install a front receiver and wiring for the winch (run winch wiring to the rear receiver so you can pull yourself OUT of trouble, too).
6 inch lift, sawsalled fenders, longer control arms...........and 31s.
Fri Sep 22, 2017 7:51 pm
Sinus211
Site Moderator
Location: Marysville Joined: Thu Mar 22, 2012 Posts: 13503
Real Name: Mike
Time to take a sawzall to the fenders, get some 31's, ditch the stablizer bar, put a skjacker 6" lift and some longer control arms on it. Install a front receiver and wiring for the winch (run winch wiring to the rear receiver so you can pull yourself OUT of trouble, too).
6 inch lift, sawsalled fenders, longer control arms...........and 31s.
Gotta agree. It'll take 33's just fine. 35's and that 4.0 will be begging for a gear reduction
"He that would make his own liberty secure, must guard even his enemy from oppression; for if he violates this duty, he establishes a precedent that will reach to himself."
Fri Sep 22, 2017 11:02 pm
AR15L
Site Supporter
Location: Nampa, Idaho Joined: Thu Mar 17, 2011 Posts: 19462
Real Name: Rick
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum