Author |
Message |
Gunnerboy
FFL / Dealer
Location: Cathlamet Joined: Wed Apr 13, 2016 Posts: 331
|
Got roped into this..no one was making barrels..so yeah.. it's expensive an there's a list but first barrel is ready so time to come up with a semi design. We have the only to spec an print barrel on the market. Here's some progress. Fluted jig was fun..each rib is a different dimension an degree of timing.
You do not have the required permissions to view the files attached to this post.
|
Thu Dec 07, 2023 6:54 pm |
|
|
NotAMerc
Site Supporter
Joined: Mon Dec 9, 2013 Posts: 2166
|
Damn it, I did not need to see this. I’ve been eying the kits for sale telling myself I don’t need one.
|
Thu Dec 07, 2023 7:09 pm |
|
|
Gunnerboy
FFL / Dealer
Location: Cathlamet Joined: Wed Apr 13, 2016 Posts: 331
|
Well I'm sitting here looking at the parts.. thinking.. looking like striker fired should be fine, will need dual springs. Now the question of big round striker hitting firing pin..or big firing pin with a sear inside a milled bolt..hmm
|
Thu Dec 07, 2023 7:18 pm |
|
|
MadPick
Site Admin
Location: Renton, WA Joined: Sun Mar 13, 2011 Posts: 52188
Real Name: Steve
|
Great. Now I just learned about another gun that I need.
_________________SteveBenefactor Life Member, National Rifle AssociationLife Member, Second Amendment FoundationPatriot & Life Member, Gun Owners of AmericaLife Member, Citizens Committee for the Right to Keep and Bear ArmsLegal Action Supporter, Firearms Policy CoalitionMember, NAGR/NFGRPlease support the organizations that support all of us.Leave it cleaner than you found it.
|
Thu Dec 07, 2023 9:31 pm |
|
|
Gunnerboy
FFL / Dealer
Location: Cathlamet Joined: Wed Apr 13, 2016 Posts: 331
|
Needs more filler, more clean up. Etc but progress has been made. I believe I can make a striker that rides inside the bolt an avoids the center placed ejector.
You do not have the required permissions to view the files attached to this post.
|
Wed Dec 13, 2023 9:06 am |
|
|
User 1234
Site Supporter
Location: Pierce County Joined: Sun Oct 14, 2018 Posts: 1128
|
|
Thu Dec 14, 2023 9:43 pm |
|
|
Sinus211
Site Moderator
Location: Marysville Joined: Thu Mar 22, 2012 Posts: 13546
Real Name: Mike
|
This is such a great project! Never even seen a pm12 in person.
_________________Licensed/Bonded/Insured Hardwood Floor Installer/Finisher http://www.hardwoodfloorsnw.com/
|
Fri Dec 15, 2023 7:43 am |
|
|
Gunnerboy
FFL / Dealer
Location: Cathlamet Joined: Wed Apr 13, 2016 Posts: 331
|
Now the real fun... These have a semi selection..but gotta make it so you can't play swap a hoe with parts an make a mg again.. denials and mods of this overly complicated fcg is gonna be fun. I already got several ideas but will have to mock it up an test everything.
You do not have the required permissions to view the files attached to this post.
|
Fri Feb 09, 2024 8:16 pm |
|
|
Gunnerboy
FFL / Dealer
Location: Cathlamet Joined: Wed Apr 13, 2016 Posts: 331
|
Got some barrels done..they didn't last long only a couple left.
You do not have the required permissions to view the files attached to this post.
|
Tue Apr 30, 2024 7:00 pm |
|
|
|