Mon Jun 05, 2017 3:42 pm
dreadi wrote:Yes, it is.
How do you know yours is better?
Mon Jun 05, 2017 4:50 pm
Yondering wrote:If you decide to try a better mount...
Mon Jun 05, 2017 7:36 pm
Sat Jun 10, 2017 1:09 pm
3584ELK wrote:dreadi wrote:Yes, I shimmed it and bore sighted it, then shot it. It took me three or four times to get it right but, it's better.
Sagela suggested a method for correction that would have taken just one shot but, I didn't have enough MOA left in the turrets. Even with them turned max I was 7" away from center. I suspect that mount is machined fine but, the rifle is likely not square. Even to get the reticle level I use three levels because the receiver is not flat or square where the magnet goes.
This suggestion comes a little late in the game, but you could use the Burris rings and inserts to get there as well. The Burris setup comes with a handy little chart to help you figure out how much adjustment you need and where to rotate the rings.http://www.burrisoptics.com/mounting-systems/rings/xtr-signature-rings