One of the interesting things that I see, as a comms guy, is everyone running out and buying a $30 Chinese radio. Now, this might seem great, that you can set up and talk to your buddies without spending a lot of dough, but you may be setting yourself up for failure.
The first question I would ask anyone is, what is your mission need for communications? Do you want to listen, coordinate with others using local amateur radio repeaters, for disaster work? Or do you need secure radios to use in a tactical environment? Other questions soon follow...
The benefit of cheap Chinese radios is obvious.. They're cheap, and they work, for what most people need. They can easily be modified for better range (antenna), and power (AA battery packs, cheap rechargeable packs, battery eliminators), but they have some pretty big drawbacks. First and foremost, let's be honest; They're disposable. If you drop it and break it, you don't feel bad.
The issue with cheap radios doesn't end at quality, it's just the beginning, when you realize how limited you really are. Virtually nothing runs on analog anymore, other than WX radio, marine (boat) radio, and ham radio, leaving you out of the loop for using it as a scanner (some exceptions apply, Thurston county, for example). But the biggest drawback isn't in not being able to listen to others, it's others being able to listen to you.
Now, who cares, right? I just told Jim-Bob to meet me back at the shop... I'm on 1 of 20,000 frequencies, no one can hear me, right? Wrong.
Modern technology used in scanners, and even $20 SDR dongles mean I can grab your signal in a matter of seconds, and instantly listen to everything you're saying. Not only that, I can quickly decipher any landmarks, routes, or locations you're using. Further, when it comes to tactical communications, the enemy you think you're sneaking up on, can now know exactly where you are and what you're doing. No bueno.
This is where secure comms come into play. Secure comms started way back in the day with a technology called voice inversion, that would invert the audio around a certain frequency and make you sound like donald duck. It wasn't really secure, just annoying. From there, newer technologies evolved... Into the currently used technologies, like AES or DES, and proprietary software encryption like ADP, and there are classified Type 1 encryption algorithms which are well beyond the scope of this post. More advanced systems implement spread spectrum frequency hopping, like SINCGARS, which reduce the risk of jamming and interception, but is largely overkill for civilian needs.
The least expensive way to jump into secure communications, is with commercially available equipment. This means big name manufacturers like Motorola, Kenwood, Harris, etc. In order to keep costs low, you're going to need to purchase equipment that's used.
In order to figure out what you need, you need to figure out who you're talking to, and develop a comms plan. A standard list of frequencies, channels, and decide on the type of encryption to use, and the encryption key. Modern commercial radios are designed for just such use.
The radio I suggest, is the Motorola XTS5000 in VHF. It's discontinued, but still readily available on places like Ebay. It supports P25, which no other amateur radio company supports, meaning your average ham can't listen in, and because P25 is an industry standard, you can listen to things like WSP. It supports ADP software encryption out of the box, which is not going to be broken by anyone outside of a 3 letter agency, and while less secure than AES-256, it's secure enough for 99% of what people will do. The XTS5K does support AES as well, but that requires additional hardware called a UCM, and a keyloader, and you run the risk of zeroing keys, leaving your radio to be a paperweight.
The XTS5K, being a commercial radio, means it has batteries with high capacity, designed to last a long time, and ability to use aftermarket antennas as well, for greater range. Things such as throat mics, ear pieces, and speaker mics are also readily available, with functions not seen in run of the mill radios, like being able to change volume, or channels, from the speaker mic. It also has the ability to be used in a docking station, turning your portable radio into a mobile radio. You slide the radio in, and *poof*, you now have a mobile radio, and it charges your battery too, hooking up to external antenna as well for greater range.
The radios are set up in a zone/channel configuration, so no longer are you stuck to 268 channels of random crap, you can have one zone set up for one thing, and another zone set up for another, to better organize your channels. I have mine set up by county/area but that's something you need to design into your comm plan.
The XTS5K supports channel announcement, so as you change channel, it can announce what channel you're on. Perfect for a belt or vest mounted radio. You can change channels using a speaker mic, with your ear piece letting you know what channel you're on, without anyone hearing what's going on, or having to dismount your radio.
The radio does support FPP, or front panel programming, which allows you to modify/change frequencies on the fly, so if you meet up with another group that has a different comm plan, you can change it on the spot. Ordinarily, you would use a computer to program it, but it can be programmed without a computer to some extent.
This is just designed to be a start, and I know I went super detailed into some stuff and very vague on others. I intentionally did that because I need to know what information you need. Please ask questions so I can answer them.
You need a comm plan before anything, BTW.
Would anyone be opposed to me putting together a WAGUNS comm plan?
EDIT 1: MODEL INFORMATIONThe XTS5000 uses the standard /\/\ portable model number formatting system.
A typical model number is H18SDH9PW7AN
The IMPORTANT things to note....
H= Handheld
18= 5000 Series
S= Band..... K= 136-174, Q=403-470, S = 450-520, U=700/800
D= Power, usually D=4-5W, E=5.1-6W, but they do have low power modes too
H=Display/keypad type. H= full keypad, with display
9= channel spacing, you can ignore this
P=Primary operation mode, you can ignore this
W=Primary system type, you can ignore this
7= Feature level, you can ignore this
AN= Revision, you can ignore this
That model number breaks down to a 450-520 Mhz model with keypad and display.
So, a VHF radio with a full keypad and display would be an H18
KDH9PW7AN
There are also RUGGED versions which are nitrogen filled and come in a yellow case, which are designed for the fire service. While they're supposed to be water resistant, the seal must be intact still for that to be the case.
DO NOT GET A MODEL THAT HAS THE 4TH DIGIT OF THE MODEL NUMBER BEING A U. That means it's 700/800 and useless unless you wanna monitor Snohomish or King Counties.
AccessoriesCar charger... Charges batteries while in the car, looks like a square cup holder. Usually around $30 or so.
XTVA.. Converts your portable into a mobile, charges the battery, provides a remote control head, loud speaker, and external antenna connections, with virtually no work (just slides in, locking into place). Usually around $100 or so. I usually opt for this because it's not that much more expensive and adds a lot of options. You can also add an amplifier and have great range. The only downside to he XTVA is that if you use a speaker mic, you'll have to detach it before it goes into the XTVA, and reattach it when you take it out.
Commander and Commander II speaker mics. These mics have programmable buttons and volume controls on them. Commander II adds a channel select switch. Most have ports for adding an earpiece, but some earlier models did not. They are usually around $50
Standard speaker mic. generic, usually runs about $20, these do not have ports for an earpiece.
Public safety mic. Looks like a standard mic with a straight cord instead of coiled, has antenna port on top. Best not to use these for VHF as they just weren't designed for them and the performance is crap.
Surveillance (2 wire and 3 wire) headsets... Super secret squirrel.. aftermarket ones are cheap, around $20... That's where you get a PTT button to clip somewhere, like your shirt, and an earpiece.
Throat mics.. Mic goes around your throat, earpiece in ear, same as above, aftermarket, around $30.
programming cable - Mandatory, IMO, about $25
Batteries.... That's a tough one. You can go anywhere from $20 to a bargain Ni-Cd, to $80 for an OEM Li-Ion..BUT.. OEM Li-Ion batteries have not been made in YEARS, so I would lean towards a quality aftermarket instead of an OEM battery.. I'd get at least 2, but you can get by with 1, provided you're not using it for 3 days at a time, with it on 24/7.
Antenna... The factory wideband antenna is OK in most places. if you want better performance, there are better antennas out there, but they're dependent on the situation, so I won't go too much into those. Mounting the antenna to a plate carrier is easily accomplished with some minor works, but severely reduces the range.
---------------------------------------------------------------------------------------------------------------------------------
Edit:
Codeplug with instructions added---
So, first thing to do is load R20 CPS.
Download V1.03 of the Codeplug from
https://easyupload.io/eksgpcLoad the codeplug through the file -> open
DO NOT TRY TO WRITE THE RADIO!
Go to the menu, and choose Tools, cloning, clone radio..
Connect your programming cable to your radio, connect the programming cable to your computer, make sure you have the correct serial port selected, and power on the radio, then CLICK READ SERIAL NUMBERThe serial number field will populate with the serial number of your radio.
After your serial number is read, click on VIEW MDC ID's.
Choose a 4 digit number as your ID, and input it in the fields.When done with that window, hit OK, then ...
CLICK ON VIEW ASTRO IDs
Input the SAME 4 digits you entered above, into those fields as well.Click on VIEW USER INFOYou guessed it, put the same 4 digits in there too...Now, hit program!
If it says features don't match, scroll down, or PM me.Once the radio is programmed, immediately READ the radio, and save your codeplug. You will use THAT to modify and change if you need, and you won't have to use the cloning process in the future.
The radio will DEFAULT to no power on password.
Please set the power on password via RADIO CONFIGURATION, DISPLAY & MENU, under the RADIO LOCK tab, click to enable radio lock, then set a password via keypad.
--------------------------
--------------------------
The first 3 zones are FPP, meaning they can be modified.
The buttons and switches are as follows..... Because there are more than 16 channels in each zone, you use the front buttons as channel up and channel down, and side buttons as zone up/zone down. That can be changed if you wish.
Sierra 1 is an encrypted frequency, local range.
----------------------
Alternate programming instructions if your radio says features don't matchClick HereThen hereand finally hereThis has taken a TON of work, lots of sleepless nights... I'm sure you can tell by some of the timestamps on the files...
If you appreciate the work I've done, feel free to 'buy me a coffee'....
https://paypal.me/XTS5000