| WaGuns.org https://www.waguns.org/ |
|
| My Wheeler https://www.waguns.org/viewtopic.php?f=148&t=100578 |
Page 5 of 7 |
| Author: | Rix86 [ Mon Jun 10, 2019 9:20 pm ] |
| Post subject: | Re: My Wheeler |
She already had a slip n twist anti wrap bar. So I decided to reuse it after modification. Ordered a mount kit, because for 41 bucks it isn't worth my time to make it  Then cut apart and reworked the bar a bit.  Thing is 250 wall and the front part is solid bar. |
|
| Author: | Rix86 [ Tue Jun 11, 2019 10:59 pm ] |
| Post subject: | Re: My Wheeler |
Just about done with the anti wrap bar  
|
|
| Author: | Rix86 [ Wed Jun 12, 2019 8:20 pm ] |
| Post subject: | Re: My Wheeler |
Shocks in. Last of the wrap bar bracket welded. Last of the fuel line bracketry and clamps in. Exhaust heat wrap near the slave cylinder is on. It's getting closer. I gotta get the other side brake done on the Mack so I can transport this thing for exhaust and nut-n-bolt it on the rack at work. |
|
| Author: | Rix86 [ Fri Jun 14, 2019 8:12 pm ] |
| Post subject: | Re: My Wheeler |
I went to the parts store to get a radiator cap. The guy asked me what kind of car and I laughed and said nope. Told him I just need an old school style big radiator cap. but they let me start it and warm it up long enough to find out the cooling fan works at the right temperature so that part is good to go. |
|
| Author: | Rix86 [ Tue Jun 18, 2019 12:09 pm ] |
| Post subject: | Re: My Wheeler |
Started the exhaust last night. Little bit of a shit show until I can have something nice done. |
|
| Author: | Rix86 [ Thu Jun 20, 2019 4:39 am ] |
| Post subject: | Re: My Wheeler |
Got exhaust on it  
|
|
| Author: | Rix86 [ Fri Jun 21, 2019 7:36 pm ] |
| Post subject: | Re: My Wheeler |
Milestone  Took it to work to nut-n-bolt it  
|
|
| Author: | Rix86 [ Sat Jun 22, 2019 7:30 am ] |
| Post subject: | Re: My Wheeler |
Oh snap 
|
|
| Author: | Arisaka [ Sat Jun 22, 2019 8:01 am ] |
| Post subject: | Re: My Wheeler |
Jeez Rix, you seem to have a little sheet metal damage there. |
|
| Author: | RocketScott [ Sat Jun 22, 2019 8:28 am ] |
| Post subject: | Re: My Wheeler |
Arisaka wrote: Jeez Rix, you seem to have a little sheet metal damage there. Pfft! Nothing a little bondo won't smooth out |
|
| Author: | Rix86 [ Sat Jun 22, 2019 8:46 am ] |
| Post subject: | Re: My Wheeler |
Shee... Mett Sheeme Sheemtle Huh? |
|
| Author: | CQBgopher [ Sat Jun 22, 2019 8:01 pm ] |
| Post subject: | Re: My Wheeler |
wheels. brand/model/size/backspacing? please and thanks |
|
| Author: | Rix86 [ Sun Jun 23, 2019 7:38 am ] |
| Post subject: | Re: My Wheeler |
Trailready beadlocks 17x8.5 4.5 bs Standard finish on everything Small ring http://secure.trbeadlocks.com/17x8-125- ... wheel.aspx |
|
| Author: | Rix86 [ Mon Jun 24, 2019 3:46 pm ] |
| Post subject: | Re: My Wheeler |
It's not completely done, but it's effectively done   All 4 corners cleared, no interference besides a slight contact with the exhaust pipe. I can live with that.  And I got the heep soft top thing mounted |
|
| Author: | Rix86 [ Wed Jun 26, 2019 10:27 pm ] |
| Post subject: | Re: My Wheeler |
Replacement p.s. pump is in and it works normally. No funny noise, doesn't overheat. Big relief |
|
| Page 5 of 7 | All times are UTC - 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|