|
|
|
It is currently Fri Apr 19, 2024 3:29 am
|
Author |
Message |
Pablo
Site Supporter
Location: Everson, WA Joined: Sun Jan 6, 2013 Posts: 28178
Real Name: Ace Winky
|
Completed today. After a few months our water system is all sorted. We have a relatively shallow well with medium hard Ca/Mg - don't mind drinking that but causes plumbing fixture build up. Plus we have some non-harmful very low level sulfur (smell) which is easily eliminated with oxidation. Other than that the water tastes and tests out fine. It just took some fiddling and trial and error - I have the passive 02 from the air system all working, plus I have a KCl instead of NaCl on the softener side for normal ion exchange. Potassium chloride is friggen expensive, but it's just the wife and I, and we just don't blow through a lot of salt. Sodium is a poison to plantsand too much is not good for humans. It's worth it to me to pay extra. Tanks........left to right Well pressure tank (control switches and valves below) Salt holding tank (front lower) - two sacks of potassium chloride, brine automatic Soft water resin media, controller and such (rear center) paid a dude for this, with install, but was very reasonable and the company was very cool Air/O2 media tank (right) FREE - people left it behind, was 100% bypassed, previously used potassium permanganate as oxidizer, no need for such a strong oxidizer, then I went air pump inject to the media, LOUD and blew GFCI, turns out passive air and one way valve is all that is needed.
_________________ Why does the Penguin in Batman sound like a duck?
Because the eagle sounds like a hawk.
|
Tue Sep 07, 2021 12:55 pm |
|
|
SporkBoy
Site Supporter
Location: Deckerville Joined: Wed Jan 13, 2016 Posts: 2944
Real Name: Rob
|
Used my rickety car carrier and old Chevy to haul my daughters Ford Ranger from Oly to my place.
Not sure what's going on but almost over heated. Pretty stressful but got it home.
Probably going to do some minor repairs then put the Ford up for sale. First right of refusal to waguns members!
_________________ “The Democrats are playing you for a political chump and if you vote for them, not only are you a chump, you are a traitor to your race.”-Malcolm X
|
Thu Sep 16, 2021 6:44 pm |
|
|
JohnMBrowning
Location: Bothell Joined: Sat Sep 12, 2015 Posts: 4872
|
My leaf blower's performance had been going down hill for a while - loss of power, leaking gas, blowing oil out the muffler.... I had been meaning to get a rebuild kit for the carb for some time now, but I couldn't find the model # for the carb anywhere on it..... Just for the hell of it, I pulled out the manual to see what info it might have --- dammit, I had already figured that shit out 3 or 4 years ago when I had to get a replacement throttle lever for it --- I had even written the model # and rebuild kit # down in the manual myself So I got a kit ordered up on Azon and got it in 2 days... Replacement went quick - just did the gaskets and diaphram - pulled the other parts to inspect, but didn't replace. Fired it up and with some (not so quick) tuning, its running like a champ again! Appears the gas leak issue is gone - will have to verify over time tho. Quite pleased with myself to fix it for a $6 rebuild kit. After 17 years, those flapper valves and pump diaphram don't work as they should --- I had figured that out on my weedwhacker a couple of years ago - no surprise the leafblower would need it too. Should have done it much sooner.....
_________________ Plan B is actually repeating Plan A.... it just involves much more alcohol.
Of the ten voices I hear in my head, only three keep telling me NOT to shoot.... Do I go with the majority or common sense?
|
Sat Nov 06, 2021 8:47 am |
|
|
vic_b
Site Supporter
Location: Maple valley Joined: Thu Oct 27, 2011 Posts: 3528
|
Built a shoe rack/storage for son and his wife. Should fit nicely at the end of their bed or entryway
You do not have the required permissions to view the files attached to this post.
|
Sun Nov 21, 2021 10:26 pm |
|
|
NWGunner
Site Supporter
Location: South Seattle Joined: Thu May 2, 2013 Posts: 12475
Real Name: Steve
|
Cool!
|
Sun Nov 21, 2021 10:28 pm |
|
|
MadPick
Site Admin
Location: Renton, WA Joined: Sun Mar 13, 2011 Posts: 52035
Real Name: Steve
|
vic_b wrote: Built a shoe rack/storage…. Damned autocorrect! You clearly meant “shotgun storage for the foot of their bed.” Looks beautiful.
_________________SteveBenefactor Life Member, National Rifle AssociationLife Member, Second Amendment FoundationPatriot & Life Member, Gun Owners of AmericaLife Member, Citizens Committee for the Right to Keep and Bear ArmsLegal Action Supporter, Firearms Policy CoalitionMember, NAGR/NFGRPlease support the organizations that support all of us.Leave it cleaner than you found it.
|
Mon Nov 22, 2021 5:23 am |
|
|
vic_b
Site Supporter
Location: Maple valley Joined: Thu Oct 27, 2011 Posts: 3528
|
MadPick wrote: vic_b wrote: Built a shoe rack/storage…. Damned autocorrect! You clearly meant “shotgun storage for the foot of their bed.” Looks beautiful. That’s why the compartment is lined. The shotgun I gave him fits nicely in it. Thank you all for the thumbs up!
|
Mon Nov 22, 2021 5:13 pm |
|
|
ironworker78
Site Supporter
Location: puyallup Joined: Sat Nov 3, 2012 Posts: 1146
|
I’ve been very slowly building out my reloading room, recently added this cabinet with six drawers. Still need to make the fronts and pulls.
You do not have the required permissions to view the files attached to this post.
_________________ If your Dad doesn't have a beard you've got two Moms
|
Thu Dec 16, 2021 8:43 pm |
|
|
Pablo
Site Supporter
Location: Everson, WA Joined: Sun Jan 6, 2013 Posts: 28178
Real Name: Ace Winky
|
ironworker78 wrote: I’ve been very slowly building out my reloading room, recently added this cabinet with six drawers. Still need to make the fronts and pulls. That looks sweet! Good ideas there. ____________________________________________________ DIY? Does moving, by hand, 3+ tons of 3/4" minus crushed rock...............damn................
_________________ Why does the Penguin in Batman sound like a duck?
Because the eagle sounds like a hawk.
|
Thu Dec 16, 2021 8:58 pm |
|
|
NWGunner
Site Supporter
Location: South Seattle Joined: Thu May 2, 2013 Posts: 12475
Real Name: Steve
|
Pablo wrote: ironworker78 wrote: I’ve been very slowly building out my reloading room, recently added this cabinet with six drawers. Still need to make the fronts and pulls. That looks sweet! Good ideas there. ____________________________________________________ DIY? Does moving, by hand, 3+ tons of 3/4" minus crushed rock...............damn................ That shoulda been a DFY —- Done For You…
|
Thu Dec 16, 2021 9:10 pm |
|
|
Pablo
Site Supporter
Location: Everson, WA Joined: Sun Jan 6, 2013 Posts: 28178
Real Name: Ace Winky
|
NWGunner wrote: Pablo wrote: ironworker78 wrote: I’ve been very slowly building out my reloading room, recently added this cabinet with six drawers. Still need to make the fronts and pulls. That looks sweet! Good ideas there. ____________________________________________________ DIY? Does moving, by hand, 3+ tons of 3/4" minus crushed rock...............damn................ That shoulda been a DFY —- Done For You… No kidding. I did find a new pain. So there is that.
_________________ Why does the Penguin in Batman sound like a duck?
Because the eagle sounds like a hawk.
|
Thu Dec 16, 2021 9:17 pm |
|
|
NWGunner
Site Supporter
Location: South Seattle Joined: Thu May 2, 2013 Posts: 12475
Real Name: Steve
|
Pablo wrote: NWGunner wrote: Pablo wrote: ironworker78 wrote: I’ve been very slowly building out my reloading room, recently added this cabinet with six drawers. Still need to make the fronts and pulls. That looks sweet! Good ideas there. ____________________________________________________ DIY? Does moving, by hand, 3+ tons of 3/4" minus crushed rock...............damn................ That shoulda been a DFY —- Done For You… No kidding. I did find a new pain. So there is that. New pains are part of the future algebraic equation to determine DIY .vs DIY. One coefficient in that equation is a derivative of medical co-pays, combined with time down, and what you can’t do while you’re healing…
Last edited by NWGunner on Thu Dec 16, 2021 10:38 pm, edited 1 time in total.
|
Thu Dec 16, 2021 9:27 pm |
|
|
Caveman Jim
Site Supporter
Location: In my Cave near the Cloquallum Joined: Thu Sep 26, 2013 Posts: 7789
Real Name: Jim Sr.
|
ironworker78 wrote: I’ve been very slowly building out my reloading room, recently added this cabinet with six drawers. Still need to make the fronts and pulls. Very nice!
_________________"You are either with us...as Americans. Or, You are against us. There is no IN BETWEEN." ??? "We cannot negotiate with those who say, 'What's mine is mine, and what's yours is negotiable.'" JFK "Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety” -Ben Franklin MadPick wrote: I don't think you beat your children enough.
|
Thu Dec 16, 2021 10:26 pm |
|
|
Pablo
Site Supporter
Location: Everson, WA Joined: Sun Jan 6, 2013 Posts: 28178
Real Name: Ace Winky
|
NWGunner wrote: One coefficient in that equation is a derivative of medical co-pays, combined with time down, and what you can’t do while you’re healing…
Good news: Woke up with no pain in my hip. Slept like a log. Bad news: Dog woke me up. Uggh.
_________________ Why does the Penguin in Batman sound like a duck?
Because the eagle sounds like a hawk.
|
Fri Dec 17, 2021 4:07 am |
|
|
NWGunner
Site Supporter
Location: South Seattle Joined: Thu May 2, 2013 Posts: 12475
Real Name: Steve
|
Pablo wrote: Good news: Woke up with no pain in my hip, yet…
FIFY
|
Fri Dec 17, 2021 4:12 am |
|
|
|
Who is online |
Users browsing this forum: No registered users and 49 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|