WaGuns.org
https://www.waguns.org/

Gunsmith who specializes in revolvers
https://www.waguns.org/viewtopic.php?f=26&t=80486		 Page 1 of 1
Author:  pistolpeter1911 [ Wed Apr 19, 2017 9:02 pm ]
Post subject:  Gunsmith who specializes in revolvers
Hey there WAGUNS friends.

I'm looking into getting a smith and wesson model 29 6 inch barrel swapped back to the 4 inch barrel. The 4 inch barrel is the actual stock barrel.

This is a - 2 model, so the barrel is pinned and threaded.

Does anyone know a good gunsmith that can do this in the South King Co area? My alternative is to send it back to S&W which I'd like to avoid if possible.

Thanks
Author:  hkcavalier [ Wed Apr 19, 2017 9:07 pm ]
Post subject:  Re: Gunsmith who specializes in revolvers
C.a.R Firearms.

http://carfirearms.com/
Author:  usrifle [ Wed Apr 19, 2017 10:08 pm ]
Post subject:  Re: Gunsmith who specializes in revolvers
I have a Hammer. some punches and a Vise, C'mon over.
Just Kidding, see the above post. :bigsmile:
Author:  pistolpeter1911 [ Wed Apr 19, 2017 10:50 pm ]
Post subject:  Re: Gunsmith who specializes in revolvers
hkcavalier wrote:
C.a.R Firearms.

I already talked to Fred. He told me to send it to Smith & Wesson.

http://carfirearms.com/
Author:  usrifle [ Wed Apr 19, 2017 11:21 pm ]
Post subject:  Re: Gunsmith who specializes in revolvers
pistolpeter1911 wrote:
hkcavalier wrote:
C.a.R Firearms.

I already talked to Fred. He told me to send it to Smith & Wesson.

http://carfirearms.com/



Interesting he would say that, must be a reason. Who swapped the barrels originally?
Author:  pistolpeter1911 [ Thu Apr 20, 2017 12:11 am ]
Post subject:  Re: Gunsmith who specializes in revolvers
usrifle wrote:
pistolpeter1911 wrote:
hkcavalier wrote:
C.a.R Firearms.

The original owner.
I don't own this firearm yet, I was planning on buying it, it's currently on Armslist. I'm rethinking my decision as it seems like this might not be the best idea.

I already talked to Fred. He told me to send it to Smith & Wesson.

http://carfirearms.com/



Interesting he would say that, must be a reason. Who swapped the barrels originally?
Author:  usrifle [ Thu Apr 20, 2017 12:22 am ]
Post subject:  Re: Gunsmith who specializes in revolvers
Don't put your comments within the quotes please, it's really muddling things up.
My advice is forget about that revolver, find another one and save yourself some grief.
Author:  pistolpeter1911 [ Thu Apr 20, 2017 1:33 am ]
Post subject:  Re: Gunsmith who specializes in revolvers
Thanks.

I tried to fix my dumb quote. Total user error n00b move
Author:  OhShoot! [ Thu Apr 20, 2017 6:34 am ]
Post subject:  Re: Gunsmith who specializes in revolvers
usrifle wrote:
Don't put your comments within the quotes please, it's really muddling things up.
My advice is forget about that revolver, find another one and save yourself some grief.

Yes, spend that money on a new revolver. Then you'll have at least one NYC reload.
Author:  mcyclonegt [ Thu Apr 20, 2017 6:53 am ]
Post subject:  Re: Gunsmith who specializes in revolvers
I have a 29-2 in six inch. They are a ton of fun to shoot. No point in switching it back to 4 inch. Not as enjoyable. I imagine there was a good reason the previous owner swapped it. Buy it and leave it alone. I'm not sure but i don't think they are rare or extremely valuable in either configuration.
Author:  hkcavalier [ Thu Apr 20, 2017 10:11 pm ]
Post subject:  Re: Gunsmith who specializes in revolvers
Surprised C.a.R. didn't want to touch it.

Cylinder gap gauges, padded vise, pin punches + hammer, new barrel. Maybe a heat gun to get things moving a little easier. It's not a difficult procedure. I've never done it but plenty of people have.
Author:  pistolpeter1911 [ Fri Apr 21, 2017 1:44 am ]
Post subject:  Re: Gunsmith who specializes in revolvers
Thanks everyone, I've decided to pass on the deal.

Pete
Page 1 of 1 All times are UTC - 8 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/