We've got this guy on the site here who's got really long dreads that might be able to help you out.
Black Sledgehammer, White M/C Hammer Time, Thor... something like that.
dreadi
| WaGuns.org https://www.waguns.org/ |
|
| Gunsmith needed: pin and weld https://www.waguns.org/viewtopic.php?f=26&t=91191 |
Page 1 of 1 |
| Author: | cramer [ Wed May 23, 2018 3:31 pm ] |
| Post subject: | Gunsmith needed: pin and weld |
Any recommendations for someone who can pin and weld a compensator to a 14.5" barrel? South sound preferred, Thurston County or Pierce. |
|
| Author: | AR15L [ Wed May 23, 2018 3:36 pm ] |
| Post subject: | Re: Gunsmith needed: pin and weld |
We've got this guy on the site here who's got really long dreads that might be able to help you out. Black Sledgehammer, White M/C Hammer Time, Thor... something like that. dreadi
|
|
| Author: | PW45 [ Wed May 23, 2018 5:12 pm ] |
| Post subject: | Re: Gunsmith needed: pin and weld |
AR15L wrote: We've got this guy on the site here who's got really long dreads that might be able to help you out. Black Sledgehammer, White M/C Hammer Time, Thor... something like that. dreadi I heard he's going to be the next Governor |
|
| Author: | KnuckleHead [ Wed May 23, 2018 7:09 pm ] |
| Post subject: | Re: Gunsmith needed: pin and weld |
Rainier Arms in Auburn did mine....did a great job. |
|
| Author: | NWGunner [ Wed May 23, 2018 7:13 pm ] |
| Post subject: | Re: Gunsmith needed: pin and weld |
AR15L wrote: We've got this guy on the site here who's got really long dreads that might be able to help you out. Black Sledgehammer, White M/C Hammer Time, Thor... something like that. dreadi 
|
|
| Author: | dreadi [ Wed May 23, 2018 7:50 pm ] |
| Post subject: | Re: Gunsmith needed: pin and weld |
Y'all are a riot.  I'm not setup for welding. |
|
| Author: | cramer [ Thu May 24, 2018 8:00 am ] |
| Post subject: | Re: Gunsmith needed: pin and weld |
KnuckleHead wrote: Rainier Arms in Auburn did mine....did a great job. So far they are the only place I've found that advertises the service. I was hoping to find a gunsmith closer to home that can handle it. |
|
| Author: | Unicorn [ Fri Jun 22, 2018 10:01 pm ] |
| Post subject: | Re: Gunsmith needed: pin and weld |
Did you get this done? |
|
| Author: | Powderman [ Sat Jun 23, 2018 12:46 am ] |
| Post subject: | Re: Gunsmith needed: pin and weld |
Talk to Andy at East county guns. |
|
| Author: | cramer [ Sat Jun 23, 2018 7:41 am ] |
| Post subject: | Re: Gunsmith needed: pin and weld |
Unicorn wrote: Did you get this done? I did. Ended up drilling it myself and having it welded. Thanks for the recommendation for East County. I'll check with them next time i need some work. |
|
| Author: | Unicorn [ Wed Aug 01, 2018 9:56 pm ] |
| Post subject: | Re: Gunsmith needed: pin and weld |
I was going to say that I do it. I5 Guns. At least once we get our welder back. Probably will have to get gas. Not as neat as Rainier though, but better than a 5 year old. |
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|