| WaGuns.org https://www.waguns.org/ |
|
| I need a little custom work on a 4 gauge blunderbuss https://www.waguns.org/viewtopic.php?f=26&t=96268 |
Page 1 of 1 |
| Author: | LordChaos [ Wed Dec 05, 2018 3:10 pm ] |
| Post subject: | I need a little custom work on a 4 gauge blunderbuss |
So... I have a one off, hand built, 4 gauge blunderbuss. It's priceless (to me at least) and I need to find someone who can extract a sheared screw on my frizzen. I also need a matching one put back in so I can fire my baby. Pics included. |
|
| Author: | hartcreek [ Wed Dec 05, 2018 8:54 pm ] |
| Post subject: | Re: I need a little custom work on a 4 gauge blunderbuss |
Easy outs and reverse drill bits do not care the age of the metal being used on. Your problem is finding someone to hand cut the replacement cap screw and will take the amount of money you want to offer since it appears that you do not want to do it yourself. |
|
| Author: | LordChaos [ Thu Dec 06, 2018 3:55 pm ] |
| Post subject: | Re: I need a little custom work on a 4 gauge blunderbuss |
What amount of money would that be? I don't recall giving a budget. |
|
| Author: | mash man [ Thu Dec 06, 2018 4:00 pm ] |
| Post subject: | Re: I need a little custom work on a 4 gauge blunderbuss |
this is your guy, he can make any part you need. http://www.curlywolfguns.com/ if you don't want to drive to Shelton or you would rather drive to yelm area I would give countyline a call. |
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|