Author |
Message |
BadKarma
Site Moderator
Location: Duvall Joined: Tue Sep 13, 2011 Posts: 8657
Real Name: Jaime
|
RocketScott wrote: I have a stainless muzzle break. Excellent. Let me know how I can get it from you.
|
Mon May 21, 2018 1:16 pm |
|
|
BadKarma
Site Moderator
Location: Duvall Joined: Tue Sep 13, 2011 Posts: 8657
Real Name: Jaime
|
OK folks. OP is updated. We received the components back from cerakoting, engraving and I put some of the major parts together on the lower. We are still missing a few key items to complete this build and start the raffle. Remember, all money for this will go to the Tumwater Shooting Team to support their program.
|
Sat Nov 17, 2018 2:10 pm |
|
|
RocketScott
Site Supporter
Location: Kentucky Joined: Fri Jan 16, 2015 Posts: 11045
|
I bet if you email Aero about the hand guard screws and the barrel nut shims they will probably send them to you for free. I can measure the screws on one of mine and get replacements if they won't
Looks like it needs an upper parts kit too. I can send you one as well as the crush washer. Should have thrown one in when I sent the muzzle device
_________________ You may be right, I may be crazy, but it just may be a lunatic you're looking for
|
Sat Nov 17, 2018 2:40 pm |
|
|
Pablo
Site Supporter
Location: Everson, WA Joined: Sun Jan 6, 2013 Posts: 28149
Real Name: Ace Winky
|
Jaime - I don't have much, but would you like a NIB set of ERGO OD Green rail covers, the older cooler, lowest profile type. Similar to this: https://www.ergogrips.net/shop/ergo-tex ... il-covers/Those sharp rails are crazy nasty to all contents with the safe. Probably look cool on that beast.
_________________ Why does the Penguin in Batman sound like a duck?
Because the eagle sounds like a hawk.
|
Sat Nov 17, 2018 2:48 pm |
|
|
BadKarma
Site Moderator
Location: Duvall Joined: Tue Sep 13, 2011 Posts: 8657
Real Name: Jaime
|
Just found a Upper parts kit so I installed it. san just donated a charging handle.
|
Sat Nov 17, 2018 2:59 pm |
|
|
BadKarma
Site Moderator
Location: Duvall Joined: Tue Sep 13, 2011 Posts: 8657
Real Name: Jaime
|
Pablo wrote: Jaime - I don't have much, but would you like a NIB set of ERGO OD Green rail covers, the older cooler, lowest profile type. Similar to this: https://www.ergogrips.net/shop/ergo-tex ... il-covers/Those sharp rails are crazy nasty to all contents with the safe. Probably look cool on that beast. Yes please sir. Want me to swing by your place or can you drop them off?
|
Sat Nov 17, 2018 3:00 pm |
|
|
BadKarma
Site Moderator
Location: Duvall Joined: Tue Sep 13, 2011 Posts: 8657
Real Name: Jaime
|
RocketScott wrote: I bet if you email Aero about the hand guard screws and the barrel nut shims they will probably send them to you for free. I can measure the screws on one of mine and get replacements if they won't
Looks like it needs an upper parts kit too. I can send you one as well as the crush washer. Should have thrown one in when I sent the muzzle device Just installed a upper parts kit I had in the safe. I'm going to email them about the screws and shims.
|
Sat Nov 17, 2018 3:02 pm |
|
|
Pablo
Site Supporter
Location: Everson, WA Joined: Sun Jan 6, 2013 Posts: 28149
Real Name: Ace Winky
|
BadKarma wrote: Pablo wrote: Jaime - I don't have much, but would you like a NIB set of ERGO OD Green rail covers, the older cooler, lowest profile type. Similar to this: https://www.ergogrips.net/shop/ergo-tex ... il-covers/Those sharp rails are crazy nasty to all contents with the safe. Probably look cool on that beast. Yes please sir. Want me to swing by your place or can you drop them off? Going to walk dog. Will bring by.
_________________ Why does the Penguin in Batman sound like a duck?
Because the eagle sounds like a hawk.
|
Sat Nov 17, 2018 3:53 pm |
|
|
O_Kellogg
Site Supporter
Location: Yelm Joined: Sun Mar 24, 2013 Posts: 1401
Real Name: Owen
|
I pm'ed Jaime for a mailing address for the gas block and tube, but if anyone is headed up there I could hand-off to someone between Yelm and say Kent tomorrow or Monday afternoon...
|
Sat Nov 17, 2018 5:22 pm |
|
|
old11bravo
Site Supporter
Location: Everett Joined: Mon Apr 22, 2013 Posts: 3421
Real Name: Ron
|
BadKarma wrote: RocketScott wrote: I bet if you email Aero about the hand guard screws and the barrel nut shims they will probably send them to you for free. I can measure the screws on one of mine and get replacements if they won't
Looks like it needs an upper parts kit too. I can send you one as well as the crush washer. Should have thrown one in when I sent the muzzle device Just installed a upper parts kit I had in the safe. I'm going to email them about the screws and shims. Pretty sure the screws were with the rail when I donated it Jaime. You sure they're not laying around there somewhere?
|
Sat Nov 17, 2018 8:55 pm |
|
|
BadKarma
Site Moderator
Location: Duvall Joined: Tue Sep 13, 2011 Posts: 8657
Real Name: Jaime
|
old11bravo wrote: BadKarma wrote: RocketScott wrote: I bet if you email Aero about the hand guard screws and the barrel nut shims they will probably send them to you for free. I can measure the screws on one of mine and get replacements if they won't
Looks like it needs an upper parts kit too. I can send you one as well as the crush washer. Should have thrown one in when I sent the muzzle device Just installed a upper parts kit I had in the safe. I'm going to email them about the screws and shims. Pretty sure the screws were with the rail when I donated it Jaime. You sure they're not laying around there somewhere? Yep. They missed a transfer somewhere. Hell, I’m going to double check that I don’t still have them.
|
Sat Nov 17, 2018 9:42 pm |
|
|
BadKarma
Site Moderator
Location: Duvall Joined: Tue Sep 13, 2011 Posts: 8657
Real Name: Jaime
|
The build is complete. Raffle to begin today. Thank you all who donated so much to this. https://www.waguns.org/viewtopic.php?f=28&t=96991
You do not have the required permissions to view the files attached to this post.
|
Sun Dec 30, 2018 9:28 am |
|
|
|