Sun Apr 01, 2018 2:48 pm
Sun Apr 01, 2018 8:00 pm
Sun Apr 01, 2018 8:16 pm
dreadi wrote:I have left over parts from the AR raffle. You don't even need to pry them from my cold dead hands. Mostly small parts, I'll send you a pic.
Sun Apr 01, 2018 9:55 pm
Mon Apr 02, 2018 5:55 am
golddigger14s wrote:I have a decent butt stock available.
Mon Apr 02, 2018 6:17 am
Mon Apr 02, 2018 10:48 am
Mon Apr 02, 2018 2:01 pm
Massivedesign wrote:golddigger14s wrote:I have a decent butt stock available.
Somebody hasn’t read the build sheet in the OP. :)
Mon Apr 02, 2018 3:11 pm
Mon Apr 02, 2018 3:33 pm
old11bravo wrote:Jaime,
I have an Aero Precision AR15 Enhanced Gen 2 M-LOK Handguard in 15" length. It's brand new but I do not have the BAR nut for it as I intended on attaching it to an enhanced M4E1 upper receiver. I'll donate the rail if you want it. Let me know.
Mon Apr 02, 2018 3:35 pm
Caveman Jim wrote:Massivedesign wrote:golddigger14s wrote:I have a decent butt stock available.
Somebody hasn’t read the build sheet in the OP. :)
Is reading a requirement? I'm just here for the pics.
I can throw in 2 New Pmag 30 AR/M4 gen 2 magazines if needed.
Mon Apr 02, 2018 5:40 pm
BadKarma wrote:old11bravo wrote:Jaime,
I have an Aero Precision AR15 Enhanced Gen 2 M-LOK Handguard in 15" length. It's brand new but I do not have the BAR nut for it as I intended on attaching it to an enhanced M4E1 upper receiver. I'll donate the rail if you want it. Let me know.
Thank you for the offer. Looks familiar...
Will this work with the bear creek upper though? I thought the “e” versions only mate with the Aero Uppers? I will have to investigate a bit.
Tue Apr 03, 2018 7:51 am
I'll buy the nut if y'all want to use this handguard.old11bravo wrote:BadKarma wrote:old11bravo wrote:Jaime,
I have an Aero Precision AR15 Enhanced Gen 2 M-LOK Handguard in 15" length. It's brand new but I do not have the BAR nut for it as I intended on attaching it to an enhanced M4E1 upper receiver. I'll donate the rail if you want it. Let me know.
Thank you for the offer. Looks familiar...
Will this work with the bear creek upper though? I thought the “e” versions only mate with the Aero Uppers? I will have to investigate a bit.
It will work fine with a Bear creek upper but as I said, "You will need a BAR nut" to use as the barrel nut. They can be found as cheap as $20 and for as much as $40. It's here if you want it.
Here is a link to a BAR nut for sale at GRO but someone here may have one they could donate too.
https://www.graniteridgeoutfitters.com/Aero-Precision-AR15-BAR-Barrel-Nut-APRH100268.htm
https://webyshops.com/products/aero-precision-aprh100268?variant=3739000799245
This one is $26 but I've never bought from this vendor:
http://mtandgtactical.com/areo-precision-ar15-bar-barrel-nut/
and AP:
https://aeroprecisionusa.com/ar15-bar-barrel-nut.html?avad=48247_d118bc0b1
Tue Apr 03, 2018 2:59 pm
old11bravo wrote:BadKarma wrote:old11bravo wrote:Jaime,
I have an Aero Precision AR15 Enhanced Gen 2 M-LOK Handguard in 15" length. It's brand new but I do not have the BAR nut for it as I intended on attaching it to an enhanced M4E1 upper receiver. I'll donate the rail if you want it. Let me know.
Thank you for the offer. Looks familiar...
Will this work with the bear creek upper though? I thought the “e” versions only mate with the Aero Uppers? I will have to investigate a bit.
It will work fine with a Bear creek upper but as I said, "You will need a BAR nut" to use as the barrel nut. They can be found as cheap as $20 and for as much as $40. It's here if you want it.
Here is a link to a BAR nut for sale at GRO but someone here may have one they could donate too.
https://www.graniteridgeoutfitters.com/Aero-Precision-AR15-BAR-Barrel-Nut-APRH100268.htm
https://webyshops.com/products/aero-precision-aprh100268?variant=3739000799245
This one is $26 but I've never bought from this vendor:
http://mtandgtactical.com/areo-precision-ar15-bar-barrel-nut/
and AP:
https://aeroprecisionusa.com/ar15-bar-barrel-nut.html?avad=48247_d118bc0b1
Tue Apr 10, 2018 3:43 pm