WaGuns.org
https://www.waguns.org/

2018 AR-15 Build for a Cause
https://www.waguns.org/viewtopic.php?f=28&t=89796
Page 3 of 3

Author:  BadKarma [ Mon May 21, 2018 1:16 pm ]
Post subject:  Re: 2018 AR-15 Build for a Cause

RocketScott wrote:
I have a stainless muzzle break.

Excellent. Let me know how I can get it from you.

Author:  BadKarma [ Sat Nov 17, 2018 2:10 pm ]
Post subject:  Re: 2018 AR-15 Build for a Cause

OK folks. OP is updated. We received the components back from cerakoting, engraving and I put some of the major parts together on the lower. We are still missing a few key items to complete this build and start the raffle. Remember, all money for this will go to the Tumwater Shooting Team to support their program.

Author:  RocketScott [ Sat Nov 17, 2018 2:40 pm ]
Post subject:  Re: 2018 AR-15 Build for a Cause

I bet if you email Aero about the hand guard screws and the barrel nut shims they will probably send them to you for free. I can measure the screws on one of mine and get replacements if they won't

Looks like it needs an upper parts kit too. I can send you one as well as the crush washer. Should have thrown one in when I sent the muzzle device

Author:  Pablo [ Sat Nov 17, 2018 2:48 pm ]
Post subject:  Re: 2018 AR-15 Build for a Cause

Jaime - I don't have much, but would you like a NIB set of ERGO OD Green rail covers, the older cooler, lowest profile type. Similar to this:

https://www.ergogrips.net/shop/ergo-tex ... il-covers/

Those sharp rails are crazy nasty to all contents with the safe. Probably look cool on that beast.

Author:  BadKarma [ Sat Nov 17, 2018 2:59 pm ]
Post subject:  Re: 2018 AR-15 Build for a Cause

Just found a Upper parts kit so I installed it. san just donated a charging handle.

Author:  BadKarma [ Sat Nov 17, 2018 3:00 pm ]
Post subject:  Re: 2018 AR-15 Build for a Cause

Pablo wrote:
Jaime - I don't have much, but would you like a NIB set of ERGO OD Green rail covers, the older cooler, lowest profile type. Similar to this:

https://www.ergogrips.net/shop/ergo-tex ... il-covers/

Those sharp rails are crazy nasty to all contents with the safe. Probably look cool on that beast.

Yes please sir. Want me to swing by your place or can you drop them off?

Author:  BadKarma [ Sat Nov 17, 2018 3:02 pm ]
Post subject:  Re: 2018 AR-15 Build for a Cause

RocketScott wrote:
I bet if you email Aero about the hand guard screws and the barrel nut shims they will probably send them to you for free. I can measure the screws on one of mine and get replacements if they won't

Looks like it needs an upper parts kit too. I can send you one as well as the crush washer. Should have thrown one in when I sent the muzzle device

Just installed a upper parts kit I had in the safe. I'm going to email them about the screws and shims.

Author:  Pablo [ Sat Nov 17, 2018 3:53 pm ]
Post subject:  Re: 2018 AR-15 Build for a Cause

BadKarma wrote:
Pablo wrote:
Jaime - I don't have much, but would you like a NIB set of ERGO OD Green rail covers, the older cooler, lowest profile type. Similar to this:

https://www.ergogrips.net/shop/ergo-tex ... il-covers/

Those sharp rails are crazy nasty to all contents with the safe. Probably look cool on that beast.

Yes please sir. Want me to swing by your place or can you drop them off?


Going to walk dog. Will bring by.

Author:  O_Kellogg [ Sat Nov 17, 2018 5:22 pm ]
Post subject:  Re: 2018 AR-15 Build for a Cause

I pm'ed Jaime for a mailing address for the gas block and tube, but if anyone is headed up there I could hand-off to someone between Yelm and say Kent tomorrow or Monday afternoon...

Author:  old11bravo [ Sat Nov 17, 2018 8:55 pm ]
Post subject:  Re: 2018 AR-15 Build for a Cause

BadKarma wrote:
RocketScott wrote:
I bet if you email Aero about the hand guard screws and the barrel nut shims they will probably send them to you for free. I can measure the screws on one of mine and get replacements if they won't

Looks like it needs an upper parts kit too. I can send you one as well as the crush washer. Should have thrown one in when I sent the muzzle device

Just installed a upper parts kit I had in the safe. I'm going to email them about the screws and shims.

Pretty sure the screws were with the rail when I donated it Jaime. You sure they're not laying around there somewhere?

Author:  BadKarma [ Sat Nov 17, 2018 9:42 pm ]
Post subject:  Re: 2018 AR-15 Build for a Cause

old11bravo wrote:
BadKarma wrote:
RocketScott wrote:
I bet if you email Aero about the hand guard screws and the barrel nut shims they will probably send them to you for free. I can measure the screws on one of mine and get replacements if they won't

Looks like it needs an upper parts kit too. I can send you one as well as the crush washer. Should have thrown one in when I sent the muzzle device

Just installed a upper parts kit I had in the safe. I'm going to email them about the screws and shims.

Pretty sure the screws were with the rail when I donated it Jaime. You sure they're not laying around there somewhere?

Yep. They missed a transfer somewhere. Hell, I’m going to double check that I don’t still have them.

Author:  BadKarma [ Sun Dec 30, 2018 9:28 am ]
Post subject:  Re: 2018 AR-15 Build for a Cause

The build is complete. Raffle to begin today. Thank you all who donated so much to this.
https://www.waguns.org/viewtopic.php?f=28&t=96991
Attachment:
IMG_5372.JPG

Page 3 of 3 All times are UTC - 8 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/