WaGuns.org https://www.waguns.org/ |
|
PIF: Craftsman workbench with drawers https://www.waguns.org/viewtopic.php?f=28&t=92308 |
Page 1 of 1 |
Author: | edogg [ Wed Jul 04, 2018 7:29 pm ] |
Post subject: | PIF: Craftsman workbench with drawers |
I upgraded my workbench and no longer need this. It’s about 10-12 years old but was gently used and in good condition. Each of the 5 drawers has ball bearings so they roll smoothly when loaded. The workbench top is wrapped in stainless steel. Size is 54x20”. No special stuff to win this. Just PM to let me know you need it and arrange a time to come pick it up from my house in Kirkland. Sent from my iPhone using Tapatalk |
Author: | Peckerinak [ Wed Jul 04, 2018 7:33 pm ] |
Post subject: | Re: PIF: Craftsman workbench with drawers |
In Sent from my iPhone using Tapatalk |
Author: | Ops [ Wed Jul 04, 2018 8:15 pm ] |
Post subject: | Re: PIF: Craftsman workbench with drawers |
guessing its heavy and you need a truck |
Author: | Fjordforder [ Wed Jul 04, 2018 8:25 pm ] |
Post subject: | Re: PIF: Craftsman workbench with drawers |
Professional mover`s tip: These are generally surprisingly light, recommend setting in a truck bed on its back atop a blanket if not strapped down. |
Author: | edogg [ Wed Jul 04, 2018 9:01 pm ] |
Post subject: | Re: PIF: Craftsman workbench with drawers |
Got a PM from someone interested and it’s pending pickup already. Also to confirm, it’s pretty light. I’ve moved it around myself. And the top comes off which makes it easy to move. Sent from my iPhone using Tapatalk |
Author: | PayDay556 [ Wed Jul 04, 2018 9:46 pm ] |
Post subject: | Re: PIF: Craftsman workbench with drawers |
Wish I would have seen this earlier, would have we be great inside my box truck. If the deal falls through, let me know and I'll come pick it up. |
Author: | old11bravo [ Wed Jul 04, 2018 11:29 pm ] |
Post subject: | Re: PIF: Craftsman workbench with drawers |
Damn fine PIF edogg!! You just made someones day. BTW, "heavy" is a relative term.... |
Author: | spikele [ Thu Jul 05, 2018 6:46 am ] |
Post subject: | Re: PIF: Craftsman workbench with drawers |
IN |
Author: | Slipknot95758 [ Thu Jul 05, 2018 7:28 am ] |
Post subject: | Re: PIF: Craftsman workbench with drawers |
I'm pretty far down but in and can pick up fairly easily |
Author: | edogg [ Thu Jul 05, 2018 7:49 pm ] |
Post subject: | Re: PIF: Craftsman workbench with drawers |
The workbench has been picked up so the PIF is closed. Thanks for the interest! Sent from my iPhone using Tapatalk |
Page 1 of 1 | All times are UTC - 8 hours |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |