Gun store Shooting Locations It is currently Tue Jun 19, 2018 4:33 am


Rules Brads Guns Rainier Arms I5 Guns & Ammo Killer Innovations Fessleman Firearms
WGO Chat Room Rehv Arms
Gear Fortis WCA 2A Ind. Pintos WAC
Calendar





Reply to topic  [ 6 posts ] 
 Blitzkrieg Tactical... 
Author Message
Site Supporter
User avatar
Site Supporter

Location: RENTON
Joined: Fri Mar 25, 2011
Posts: 8285
Real Name: John
1st order went fine.

2nd order they sent me two standard BCH's when I paid for two Tac Latch BCH's.

3rd order...I paid for two Magpul MOE+ grips, got one standard MOE and one MOE+.

Not impressed.

In fairness, after I sent a pic of the 2nd order invoice with the CH's pictured too they sent me a return label I was unable to print due to a dead printer....though I couldn't get a reply until I sent them a pic of the invoice and CH's I received.

Then it was all good with positive answers.

I asked that they send a return label with the 3rd order....I didn't get one.

They will be getting a phone call in the AM, will finish this review based upon the end result of that call.

_________________
NRA RSO


Fri Jan 22, 2016 1:49 am
Profile
Online
Site Admin
User avatar
Site Admin

Location: Renton, WA
Joined: Sun Mar 13, 2011
Posts: 33700
Real Name: Steve
Jeez . . . 1 for 3, that ain't good.

_________________
Steve

Benefactor Life Member, National Rifle Association
Life Member, Second Amendment Foundation
Life Member, Gun Owners of America
Life Member, Citizens Committee for the Right to Keep and Bear Arms
Legal Action Supporter, Firearms Policy Coalition
Please support the organizations that support all of us.

Leave it cleaner than you found it.


Fri Jan 22, 2016 8:55 pm
Profile
Site Supporter
User avatar
Site Supporter

Location: Spanaway, Wa
Joined: Wed Apr 29, 2015
Posts: 1487
Real Name: Michael
MadPick wrote:
Jeez . . . 1 for 3, that ain't good.


Unless you are talking about Baseball in which case getting on base 1 out of 3 is good.


Fri Jan 22, 2016 9:15 pm
Profile
Site Supporter
User avatar
Site Supporter

Location: RENTON
Joined: Fri Mar 25, 2011
Posts: 8285
Real Name: John
So i called them today....said he would get me a return label as soon as we got off the phone.
He did do that, and i got a USPS shipment notice from them at the same time. (That was me sending them the stuff back)
The issue with the 1ST shipment was 2 standard CH'S arrived instead of 2 extended latch ones i paid for. (invoice included showed the right ones.)

Issues with the 2nd shipment was i ordered 2 MOE + grips and got 1 MOE + and one MOE standard.
Again, the included invoice showed 2 + grips ordered and paid for.
Seems to be an issue with order picking, not invoicing.
I was pretty annoyed over the whole thing, but am now more interested in if they make my order right and how they handle it.
Standby for more....

_________________
NRA RSO


Fri Jan 22, 2016 10:06 pm
Profile
Site Supporter
User avatar
Site Supporter

Location: RENTON
Joined: Fri Mar 25, 2011
Posts: 8285
Real Name: John
They are finally sending the correct items i ordered. How long has this taken to resolve?
Too damn long, that' for sure.
D+ is my grade for them.

_________________
NRA RSO


Wed Feb 10, 2016 3:16 pm
Profile
User avatar

Location: Federal Way
Joined: Fri May 4, 2018
Posts: 1
Real Name: Scott
Hope they did you right...

But based on my experience, probably not.

Here's what they did for/to me.

In March I called them asking about the fitment between their DPMS high profile assembled 308 upper and their 80% 308 lower. Primary concern was any gaps. They assured me it was tight. So I ordered one. Two days later I received it and put it together. It had a .008"/.009" gap on the bottom, and a .027"/.030" gap at the rear (buffer tube tower).
Called and asked about it.
They were apologetic and assured me they would take care of me. Was told they would hand pick another one and send it out.
That one arrived just as fast.
This one was missing the dust cover, forward assist and had a gap of .006" on the bottom and .024" to the rear. I also noticed the ejection port opening was off center. So much so that my Strike Industries UDC would not close properly. Called again. End result of that call, I asked for and got a 15% discount on the upper and one of their BCG's.

But wait there's more...
Finally got the handguard wanted, went to mount the barrel and discover the gas tube port is .015" low. Forcing me to bend the gas tube to get it into the upper over the barrel nut. This being a rifle length tube, it's possible. If it was a pistol length, never happen...
Call AGAIN, they say, if you got it together, it will be fine...
No assembly videos I saw, or gunsmiths I spoke to agree with that. It should slide right in.

CALL AGAIN, email, text, asking to speak with a manager or owner...
No reply. Until I left all this in their Facebook page.
Oh, THEN they reply but only thru their Facebook page.
Basically telling me they have done all they can.

Should have saved some money and gone through someone else for the parts.
Would have been better quality and less expensive.


Fri May 04, 2018 9:31 am
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 6 posts ] 

Who is online

Users browsing this forum: Google [Bot] and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum



Rent Me Pintos NRA SAF CCKRBA
Aldersons e-arms.com


Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.
[ Time : 0.768s | 17 Queries | GZIP : On ]