| WaGuns.org https://www.waguns.org/ |
|
| Pin and Welding Requested https://www.waguns.org/viewtopic.php?f=36&t=98308 |
Page 1 of 1 |
| Author: | Jaejin0417 [ Sun Feb 10, 2019 7:25 pm ] |
| Post subject: | Pin and Welding Requested |
I’m wanting to do a pin and welded 14.5” build but it seems that it’s quite difficult to find a pre pinned barrel that has the muzzle device I want. Is anyone able to pin and weld for me (Tacoma/Seattle area) for a little bit of cash? I’ll try to find a muzzle device that’s already pre-drilled. |
|
| Author: | waglocker [ Sun Feb 10, 2019 9:30 pm ] |
| Post subject: | Re: Pin and Welding Requested |
Rehv Arms can do it. I've had a couple done by them with great results and decently quick turn around time. In Tacoma, I do believe MD Firearms can do that in their gunshop as well. |
|
| Author: | Jaejin0417 [ Sun Feb 10, 2019 9:58 pm ] |
| Post subject: | Re: Pin and Welding Requested |
waglocker wrote: Rehv Arms can do it. I've had a couple done by them with great results and decently quick turn around time. In Tacoma, I do believe MD Firearms can do that in their gunshop as well. Do you by chance know how much it cost? |
|
| Author: | Mr. Q [ Sun Feb 10, 2019 11:14 pm ] |
| Post subject: | Re: Pin and Welding Requested |
I would recommend rainier arms, but they’ve had two of my rifles in there for the last two months....so, I’m not a happy camping individual at the moment. Just trying to be patient since I’ve been shooting with other guns I have. Sent from my iPhone using Tapatalk |
|
| Author: | dreadi [ Sun Feb 10, 2019 11:44 pm ] |
| Post subject: | Re: Pin and Welding Requested |
Surely someone on here can drill and weld. Well before my time of smithing I had two of these done in about 20 minutes by a guy down the street. They looked just as good as any blind pin weld I’d ever seen on a BCM factory setup. |
|
| Author: | Mr. Q [ Mon Feb 11, 2019 2:14 am ] |
| Post subject: | Re: Pin and Welding Requested |
Well....I didn’t just trust anyone since my muzzle devices are suppressor hosts.... Sent from my iPhone using Tapatalk |
|
| Author: | The mad scientist [ Sat Feb 16, 2019 8:35 pm ] |
| Post subject: | Re: Pin and Welding Requested |
I have all the tooling to drill muzzle devices, pin and weld it for you(as long as it's not titanium or aluminum) if you're still looking for someone to do that for you. |
|
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|