Author |
Message |
Gasitman
Site Supporter
Location: Fife Joined: Fri Mar 18, 2011 Posts: 1688
|
Kolat wrote: Differences in colors when anodizing is common and well docum3nted acrossed every manufacturer out there that offers it. Yes I understand. As I stated the upper and lower are close enough. And so is this upper that they sent me. I don’t see how hard it would be for them to put some type of color sticker on the end of each box so that they know which piece was anodized with what kind of material. I’m sure they can anodize quite a few with the same mixture and then when they go to a different make sure it’s a different color of a sticker. It’s not that hard. This looks so much better and within the range that is acceptable. However I found more blems in the lower today. I’m not that worried about that. It will be covered in oil, gas and sweat soon enough.
You do not have the required permissions to view the files attached to this post.
_________________ A long time ago we had empires run by emperors. Then we had kingdoms run by kings. And now we have countries run by Cu…
|
Sat Mar 25, 2023 1:30 pm |
|
|
Gasitman
Site Supporter
Location: Fife Joined: Fri Mar 18, 2011 Posts: 1688
|
Here’s a side-by-side comparison of the first one I got, and the second one I got. I can definitely live with the second one. Like I said, they need to put some type of code or sticker on the boxes, and try to match them up as best they can for the customers. I do appreciate them, letting me send the items back without any fees and I don’t have to pay for shipping. Not to mention, I got this next day, thank you Aero! Also, I did order the other style hand guard to see if the color was better. Maybe that it’s made with a different alloy? IDK?
You do not have the required permissions to view the files attached to this post.
_________________ A long time ago we had empires run by emperors. Then we had kingdoms run by kings. And now we have countries run by Cu…
|
Sat Mar 25, 2023 2:07 pm |
|
|
Sinus211
Site Moderator
Location: Marysville Joined: Thu Mar 22, 2012 Posts: 13503
Real Name: Mike
|
Wow, that’s a huge improvement over the first one!
_________________Licensed/Bonded/Insured Hardwood Floor Installer/Finisher http://www.hardwoodfloorsnw.com/
|
Sat Mar 25, 2023 4:12 pm |
|
|
Mediumrarechicken
Location: Puyallup Joined: Thu Aug 16, 2012 Posts: 9065
Real Name: Richard Fitzwelliner
|
Green anodizing is all over the place when it comes to colors. It's very temperamental. Youd have to have all your stuff done in the same batch of it's going to look different
_________________ If she sits on your face and you can still hear, SHE'S NOT FAT.
I'm going to type out 3 paragraphs and wax eloquently about a similar story in my life. Pm me if you figured it out.
|
Sat Mar 25, 2023 5:47 pm |
|
|
Mediumrarechicken
Location: Puyallup Joined: Thu Aug 16, 2012 Posts: 9065
Real Name: Richard Fitzwelliner
|
Gasitman wrote: While I see your point, I hope you can see mine? One should not have to hunt for problems before. There shouldn’t have to be warnings or disclaimers or links to some things there are bad. This is a blem, sell it as such. If all these lowers are anodized black, how come most all of them look the same? So in my mind, I would think that the green would be the best suited to not be different from cerekote color. Obviously I was wrong in my thinking. Because black isn't a transparent color, this green is very transparent, there's also different types of aluminum being used
_________________ If she sits on your face and you can still hear, SHE'S NOT FAT.
I'm going to type out 3 paragraphs and wax eloquently about a similar story in my life. Pm me if you figured it out.
|
Sat Mar 25, 2023 5:52 pm |
|
|
beckdw
Site Supporter
Location: Tri -Cities Joined: Thu May 23, 2013 Posts: 2798
Real Name: David
|
I got the Kodiak Brown ano, with a pretty similar mismatch. It'll wear in. Or I'll rattle can camo it once it gets built out.
|
Sat Mar 25, 2023 10:17 pm |
|
|
KeystoneCowboy
Site Supporter
Location: Burlington Joined: Wed Aug 22, 2012 Posts: 5999
Real Name: Kyle
|
This is super simple. Different batches of Ano, and the differences of Alloy between 6000 series and 7000 series aluminum alloys. Aero made it right, done deal.
_________________ Looking for: S&W Schofield 2x (.38/357) Coonan 1911 Nemo Omen JM Marlin 39M Tikka T3 Tactical(.308) BAR(.308)
|
Sun Mar 26, 2023 8:13 am |
|
|
Old Growth
Site Supporter
Location: Nisqually Valley Joined: Wed Oct 5, 2016 Posts: 4834
|
It’s an AR. Get over it. It’s like bitchen about faded paint on one fender of your KIA. Jeezus.
|
Sun Mar 26, 2023 8:52 am |
|
|
cmica
Site Supporter
Location: I-5 /512 Joined: Thu Dec 8, 2011 Posts: 15231
Real Name: chris
|
Old Growth wrote: It’s an AR. Get over it. It’s like bitchen about faded paint on one fender of your KIA. Jeezus. IN for the winnow let it get stolen, unless you got a trunk monkey
_________________
|
Sun Mar 26, 2023 11:01 am |
|
|
|