Author |
Message |
Barfly
Site Supporter
Location: Lacey Joined: Thu Nov 29, 2012 Posts: 2292
Real Name: Jim
|
Since Glock still doesn't make an extended 10mm mag, I wanted to get info from those of you who have used the various aftermarket options.
I have read online that the SGM Tactical seem to run fairly well. Some seem to like ETS.
anyone have some experience that can shed some light?
Asking for a friend...Thanks!
|
Tue Nov 22, 2022 10:35 am |
|
|
Rix86
Site Supporter
Location: Shelton Joined: Sun Nov 17, 2013 Posts: 5838
|
Kriss extensions seen to work fine.
|
Tue Nov 22, 2022 11:34 am |
|
|
Barfly
Site Supporter
Location: Lacey Joined: Thu Nov 29, 2012 Posts: 2292
Real Name: Jim
|
Rix86 wrote: Kriss extensions seen to work fine. Yeah? I have heard about them potentially getting damaged where the extension mounts from folks online. That and they are as much, or more, as magazines, lol. Someday down the road, I know that Aero will finally release their .45/10mm lower for a decent PCC.
|
Tue Nov 22, 2022 12:23 pm |
|
|
Rix86
Site Supporter
Location: Shelton Joined: Sun Nov 17, 2013 Posts: 5838
|
It's an extension, right? So there's a ton of leverage on the bottom of the mag on the base pad rails. No way around it. So using it as a club is a bad idea.
|
Wed Nov 23, 2022 5:55 am |
|
|
Jeffro
Site Supporter
Location: Camano Island, WA Joined: Fri Mar 18, 2011 Posts: 740
Real Name: Jeff
|
How about practicing reloading and carry an extra mag? I carry 2 spares, that gives 40+ rounds out of my 23 with about 3 seconds between reloads (I know I should work on it, but I’m not shooting competition) What’s an extra 2-3 in the mag worth if you risk ftf or other failures?
_________________ The Dude Abides
|
Wed Nov 23, 2022 6:47 am |
|
|
Sinus211
Site Moderator
Location: Marysville Joined: Thu Mar 22, 2012 Posts: 13503
Real Name: Mike
|
I have a bunch of SGM 10mm mags. They all run well.
_________________Licensed/Bonded/Insured Hardwood Floor Installer/Finisher http://www.hardwoodfloorsnw.com/
|
Wed Nov 23, 2022 7:19 am |
|
|
SFCRMSA
Site Supporter
Location: Lacey/Olympia/JBLM Joined: Tue May 10, 2011 Posts: 3111
Real Name: Marco
|
Personally, the ETS magazines I have for my Glock platforms have performed very well. There have been some improvements over the initial product line over time. Korean Glock magazines are CRAP. You might think they are better because they are metal lined, but the polymer used in the body of the magazines is cheap. Load one and then it will bulge out in the grip of your handgun. Get stuck, then jam and not drop free. Been waiting a long time for Glock (OEM) to make larger capacity magazines for .40 cal, 45 ACP and 10MM.
_________________ "Dedication, perseverance, commitment and tenacity are the traits you will find in those who finish and achieve their dreams."
There are times when the situation as it occurs, dictates the course of actions that follow.
"I stand for the National Anthem, always have, always will"
On days like this, I often wonder what Gary Gordon and Randy Shughart would do...
|
Tue Nov 29, 2022 6:48 pm |
|
|
dreadi
Site Supporter / FFL Dealer
Location: Tacoma, Washington Joined: Fri Nov 21, 2014 Posts: 8358
|
Depends on what you’re putting them in. Some of those type mags designed for Glock, only work 100% in Glocks. Other platforms may be less reliable.
_________________BLACK HAMMER ARMSBuy A Suppressor http://www.silencershop.com/blackhammerarmsType 7 Class 2 SOT NFA Dealer 1911 Pistolsmithing Firearm Refinishing GLOCK Certified Armorer CMMG Authorized Dealer NEMO Arms Authorized Dealer http://www.blackhammerarms.comhttp://www.facebook.com/blackhammerarmshttps://www.instagram.com/blackhammerarms/
|
Tue Nov 29, 2022 11:22 pm |
|
|
|