Gun store Shooting Locations It is currently Sat May 26, 2018 9:58 am


Rules Brads Guns RA I5 Guns & Ammo Killer Innovations Fessleman Firearms
WGO Chat Room Rehv Arms
Gear Fortis WCA 2A Ind. Pintos WAC
Calendar





Reply to topic  [ 6 posts ] 
 loose roll pins 
Author Message
Site Supporter
User avatar
Site Supporter

Location: Piece/Clallam
Joined: Wed Oct 17, 2012
Posts: 10341
So I have a charging handle with loose roll pins. they can be easily pushed out with a punch.

What would you recommend to fix them? would Loctite work? need to find bigger pins? can I enlarge the pins to be a tighter fit?

_________________
Image

Yaki's - last journey

Promote a Growth Mindset. Don't let a fixed mindset not allow change for the better.

pow·er trip - noun - a self-aggrandizing quest for ever-increasing control over others.


Tue Nov 21, 2017 2:47 pm
Profile
Site Supporter
User avatar
Site Supporter

Location: Index
Joined: Thu Aug 23, 2012
Posts: 7385
Real Name: Jeff
Lay the pin on the benchtop, seam side up.

Place a sharp chisel into the seam.

Give it a tap.

Not too much. Better to do too little and have to tap it again, than to make it too big in one fell swoop.

That should make the pin last a while longer.

If it gets loose again soon, buy replacement pins.

_________________
-Jeff
Image

How can I help you, and/or make you smile, today?

Personally, I'd like to see cops kill fewer people, and the courts kill more of them.~snozzberries
United Airlines: We'll beat your ass and kill your little dog too!~jdhbulseye
Notice, no school shootings in the ghetto? It's because they're already outgunned and they know it.....~TechnoWeenie
Re: Reddit Bans: It is like they are giving alcohol to monkeys, then asking them to make up new rules. ~BadKarma
Cheaters should learn to just pack bags and bags of guns into the Casino since that makes you invisible to surveillance.... ~olydemon
Our forefathers would be shooting by now. ~waglocker
Well there might be a rise in drive by airsoft attacks. ~xr650r
Will the last sane person leaving Seattle please lock the door behind them so these lunatics can't escape? ~sinus211
The big takeaway is that PETA now has more mass shooters than the NRA. ~RocketScott
Roughly 50% of the population is below average - some are way below average but seem to make the news with regularity ~SporkBoy


Tue Nov 21, 2017 2:52 pm
Profile
Site Supporter / FFL Dealer
User avatar
Site Supporter / FFL Dealer

Location: Tacoma
Joined: Fri Nov 21, 2014
Posts: 4414
New roll pin-cheap might be large enough to stay in place.

Drop of loc-tite, you probably already have that at home. Would it impede any pivoting movement?

Enlarge the pin-do you have a steel punch with a slightly larger outer diameter?

_________________
BLACK HAMMER ARMS
1911 Pistolsmithing
Firearm Refinishing
NEMO Arms Authorized Dealer
http://www.blackhammerarms.com
http://www.facebook.com/blackhammerarms


Tue Nov 21, 2017 2:56 pm
Profile WWW
Site Supporter
User avatar
Site Supporter

Location: Lynden
Joined: Sun Jan 12, 2014
Posts: 516
Real Name: Brian
I've used Selador's method with good results. Be careful with the chisel though, one slip and the pin can vanish into hyperspace..

If it's only a little loose, not falling out loose, you can try a very small drop of Loctite 290.
290 will actually wick into the pin/housing joint and keep it from losening up in most cases. It can still be removed with the punch.


Tue Nov 21, 2017 2:59 pm
Profile
Site Supporter
User avatar
Site Supporter

Location: Piece/Clallam
Joined: Wed Oct 17, 2012
Posts: 10341
I tried the enlarge it try, seemed tight to install and normal pressure didn't push it through. so it might work for a spare

_________________
Image

Yaki's - last journey

Promote a Growth Mindset. Don't let a fixed mindset not allow change for the better.

pow·er trip - noun - a self-aggrandizing quest for ever-increasing control over others.


Tue Nov 21, 2017 3:27 pm
Profile
User avatar

Location: Tacoma/Yakima
Joined: Tue Nov 27, 2012
Posts: 1111
IIRC, you can get a plastic tub of various roll pins at Harbor Freight. I would either enlarge the hole and replace with a larger pin, or expand the pin as described above.


Tue Nov 21, 2017 5:40 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 6 posts ] 

Who is online

Users browsing this forum: Google [Bot] and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum



Rent Me Pintos NRA SAF CCKRBA
Aldersons e-arms.com


Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.
[ Time : 0.730s | 17 Queries | GZIP : On ]