WaGuns.org https://www.waguns.org/ |
|
Paul Bunyan 2 Gun March 2019 https://www.waguns.org/viewtopic.php?f=42&t=99694 |
Page 1 of 1 |
Author: | PinSniper [ Sat Mar 30, 2019 10:49 pm ] |
Post subject: | Paul Bunyan 2 Gun March 2019 |
My first multi-gun match at Paul Bunyan today. Man... sharing my pcc out to two other shooters today was a sure fire way to iron out the kinks and practice some gun smithing!! * excessive fouling ( I shared my PCC with 2 other shooters) * Faulty glock mag - plastic liner delaminating * Bad ammo ( I think, blazer brass). * Broken trigger pin * Trigger pin walked out (due to bad gunsmithing on my part when reinstalling the new trigger pin). * handguard coming loose twice |
Author: | MadPick [ Sun Mar 31, 2019 6:45 am ] |
Post subject: | Re: Paul Bunyan 2 Gun March 2019 |
Looks like fun, Eric! I like the high camera angle. Is that just a friend walking with a selfie stick or similar? |
Author: | PinSniper [ Sun Mar 31, 2019 8:07 am ] |
Post subject: | Re: Paul Bunyan 2 Gun March 2019 |
MadPick wrote: Looks like fun, Eric! I like the high camera angle. Is that just a friend walking with a selfie stick or similar? It's an Insta360 camera on a 6ft stick. It captures in a 360 degree sphere at all times at about 5.7K. In post, I can then select the camera angle and zoom. It's really really neat. |
Author: | edogg [ Sun Mar 31, 2019 8:21 am ] |
Post subject: | Re: Paul Bunyan 2 Gun March 2019 |
That looks super fun! How does one get started in that? What organization oversees it and sets the rules? My only PCC is an SBR (B&T APC9). Would it be better to have something with a 16” barrel? Sent from my iPhone using Tapatalk |
Author: | quantsuff [ Sun Mar 31, 2019 8:30 am ] |
Post subject: | Re: Paul Bunyan 2 Gun March 2019 |
Reshoots rarely go....significantly better, amiright? |
Author: | MadPick [ Sun Mar 31, 2019 10:26 am ] |
Post subject: | Re: Paul Bunyan 2 Gun March 2019 |
PinSniper wrote: It's an Insta360 camera on a 6ft stick. It captures in a 360 degree sphere at all times at about 5.7K. In post, I can then select the camera angle and zoom. It's really really neat. Whoa ... cool. |
Author: | PinSniper [ Sun Mar 31, 2019 11:55 am ] |
Post subject: | Re: Paul Bunyan 2 Gun March 2019 |
edogg wrote: That looks super fun! How does one get started in that? What organization oversees it and sets the rules? My only PCC is an SBR (B&T APC9). Would it be better to have something with a 16” barrel? Sent from my iPhone using Tapatalk So this is an exhibition event, an "outlaw" match not overseen by any governing sport. But with a PCC, you can participate in basically all the practical shooting sports and all have commonality in terms of equipment for PCC. Basically, if it shoots 9mm and has a stock, you can play. Regardless of how many and what type of optic of mags available to you. IDPA - PCC Division USPSA - PCC Division United Multigun League - PCC Only Division (so it's a multi-gun match, but you can shoot every target and every stage with only a PCC) 3GN - PCC Only (I think they have a PCC only division). So yeah, if you want to get into action shooting sports, PCC actually plays nicely in all. The only requirement is that you have a stock for IDPA and USPSA, the other multi-gun sports allow braces. Which range is near to you willing to travel to on a weekend? quantsuff wrote: Reshoots rarely go....significantly better, amiright? It's definitely an adage but this was definitely the first time such a required reshoot ( that spinning thing failing to spin easily cost me 8 to 10 second. Most reshoots end up pretty similar from what I've seen unless someone blew the stage and found a technicality to do a reshoot. There's definitely a lot more pressure on a reshoot to do "better" despite the fact you were always doing your best on the prior run anyway. My reshoot... I had two severe double feeds. |
Author: | quantsuff [ Sun Mar 31, 2019 12:00 pm ] |
Post subject: | Re: Paul Bunyan 2 Gun March 2019 |
At Idaho state match 3 years ago I had to reshoot the same stage 3 times, back-to-back, because mover reset failure. Yeesh. |
Page 1 of 1 | All times are UTC - 8 hours |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |