|
|
|
It is currently Tue Apr 23, 2024 2:11 pm
|
|
Page 1 of 1
|
[ 5 posts ] |
|
Savage 6A Bolt/Semi Supressor Build?
Author |
Message |
UB40
Site Supporter
Location: Federal Way + I-5 Corridor Joined: Thu Oct 27, 2011 Posts: 1372
|
These are interesting and unusual guns. About 60-70 years old. Can be fed .22LR as semi auto or LR/L/S on straight pull bolt action. Oddly, it’s also a bolt-close-on-trigger-release action. I love old 22’s and got this for a very good price. Turns out at 19” just above the end of the feed tube it has a bulge and a hairline crack on said bulge. Doubt that’s safe. The appeal of choosing single or semi is nice for a supressor. I just happen to have a SilencerCo Spectre II in NFA jail..... so it got me to thinking. I could cut the barrel to 17” (from 24”), shorten feed tube, professionally have the thread concentric 1/2x28 done, muzzle crown and have the barrel ceracoated. I hate to chop old guns but this would give it new purpose and love.
Ideas? Comments? Am I horrible gun owner to chop something like this?
You do not have the required permissions to view the files attached to this post.
_________________ If interested in an item I have, please PM me... I don't always remember to re-check the thread.
Things I’ll take in trade: KAC Micro rear sight, KAC M5/M4 RAS, Glock 29 Gen3/4, 17C Gen4, Glock 31C Gen4 slide, Glock 20/29/19/17/22/23/21 mags, TC Encore parts
Last edited by UB40 on Wed Jun 12, 2019 11:29 pm, edited 1 time in total.
|
Wed Jun 12, 2019 11:16 pm |
|
|
UB40
Site Supporter
Location: Federal Way + I-5 Corridor Joined: Thu Oct 27, 2011 Posts: 1372
|
Also, I love sonic cleaners. This is after I used oil and a paper towel etc
You do not have the required permissions to view the files attached to this post.
_________________ If interested in an item I have, please PM me... I don't always remember to re-check the thread.
Things I’ll take in trade: KAC Micro rear sight, KAC M5/M4 RAS, Glock 29 Gen3/4, 17C Gen4, Glock 31C Gen4 slide, Glock 20/29/19/17/22/23/21 mags, TC Encore parts
|
Wed Jun 12, 2019 11:28 pm |
|
|
UB40
Site Supporter
Location: Federal Way + I-5 Corridor Joined: Thu Oct 27, 2011 Posts: 1372
|
Here’s the receiver. It’s in decent shape, a nice stock and functions fine. Other than 4 small scope rail holes, it is 100% unmolested original survived right down to every part. Even has the first owners tiny initials and city (Warren, WA???) carved into the buttplate.
You do not have the required permissions to view the files attached to this post.
_________________ If interested in an item I have, please PM me... I don't always remember to re-check the thread.
Things I’ll take in trade: KAC Micro rear sight, KAC M5/M4 RAS, Glock 29 Gen3/4, 17C Gen4, Glock 31C Gen4 slide, Glock 20/29/19/17/22/23/21 mags, TC Encore parts
|
Wed Jun 12, 2019 11:32 pm |
|
|
MadPick
Site Admin
Location: Renton, WA Joined: Sun Mar 13, 2011 Posts: 52064
Real Name: Steve
|
If it's unsafe as is . . . then hell yeah, I like your "chop it" plan! That would be cool.
_________________SteveBenefactor Life Member, National Rifle AssociationLife Member, Second Amendment FoundationPatriot & Life Member, Gun Owners of AmericaLife Member, Citizens Committee for the Right to Keep and Bear ArmsLegal Action Supporter, Firearms Policy CoalitionMember, NAGR/NFGRPlease support the organizations that support all of us.Leave it cleaner than you found it.
|
Thu Jun 13, 2019 7:49 am |
|
|
UB40
Site Supporter
Location: Federal Way + I-5 Corridor Joined: Thu Oct 27, 2011 Posts: 1372
|
I found an extra barrel, which is easily swapped. I’ll be following through with my plan for the original bulged Barrel
_________________ If interested in an item I have, please PM me... I don't always remember to re-check the thread.
Things I’ll take in trade: KAC Micro rear sight, KAC M5/M4 RAS, Glock 29 Gen3/4, 17C Gen4, Glock 31C Gen4 slide, Glock 20/29/19/17/22/23/21 mags, TC Encore parts
|
Sun Jun 16, 2019 9:48 pm |
|
|
|
|
Page 1 of 1
|
[ 5 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 32 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|