Gun store Shooting Locations It is currently Tue Oct 20, 2020 4:24 pm


Rules Brads Guns Rainier Arms McCallen Killer Innovations Fessleman Firearms
WGO Chat Room Rehv Arms Vantage Reloading
Gear Fortis WCA 2A Ind. Pintos WAC
Calendar




Reply to topic  [ 35 posts ]  Go to page Previous  1, 2, 3
 Rechambering a Japanese Type 99 Rifle? 
Author Message
User avatar

Location: Bullhead City
Joined: Sun Sep 13, 2020
Posts: 1
Hello all,

I know this is a only topic but I recently picked up a arisaka type 99 and was wondering how your conversion went. I know you said you were going to use 7.62x39, I'm wanting to use 30-06 is this possible? Also could you please post some pictures of your insert already installed, ( assuming you still have the rifle ) thank you very much


Sun Sep 13, 2020 12:47 pm
Profile
Site Admin
User avatar
Site Admin

Location: Renton, WA
Joined: Sun Mar 13, 2011
Posts: 42100
Real Name: Steve
Techdiver_6366 wrote:
Hello all,

I know this is a only topic but I recently picked up a arisaka type 99 and was wondering how your conversion went. I know you said you were going to use 7.62x39, I'm wanting to use 30-06 is this possible? Also could you please post some pictures of your insert already installed, ( assuming you still have the rifle ) thank you very much


Welcome to WaGuns!

_________________
Steve

Benefactor Life Member, National Rifle Association
Life Member, Second Amendment Foundation
Life Member, Gun Owners of America
Life Member, Citizens Committee for the Right to Keep and Bear Arms
Legal Action Supporter, Firearms Policy Coalition
Please support the organizations that support all of us.

Leave it cleaner than you found it.


Sun Sep 13, 2020 12:49 pm
Profile
Site Supporter
User avatar
Site Supporter

Location: Tacoma
Joined: Sat May 4, 2013
Posts: 4340
Techdiver_6366 wrote:
Hello all,

I know this is a only topic but I recently picked up a arisaka type 99 and was wondering how your conversion went. I know you said you were going to use 7.62x39, I'm wanting to use 30-06 is this possible? Also could you please post some pictures of your insert already installed, ( assuming you still have the rifle ) thank you very much


You can Rechamber it to 30.06, as the calibers are fairly close. You will have to ream the chamber deeper to accommodate the 30.06. Then you will be sending a .308 diameter bullet down a barrel intended for a .312. It will work, unless you want benchrest accuracy. Was done for many years after WW2, mostly for cheap hunting rifles. My dad told me of barrels of arisaka rifles at $5 each at the local hardware store, in the late 40s and early 50s.

Or, just reform and trim 06 brass and shoot 7.7 x 58 jap, as the emperor intended.


Last edited by Arisaka on Sun Sep 13, 2020 2:08 pm, edited 1 time in total.



Sun Sep 13, 2020 1:54 pm
Profile
Site Supporter
User avatar
Site Supporter

Location: Tacoma :(
Joined: Fri Oct 21, 2011
Posts: 2184
Welcome!

I posted pictures of mine on the last page.

_________________
"A nation grown free in a single day is a child born with the limbs and the vigour of a man, who would take a drawn sword for his rattle, and set the house in a blaze that he might chuckle over the splendour." Sydney Smith (1771-1845)
Spoiler: show
NOW YOU DID IT...
ImageImageImageImageImageImageImage


Sun Sep 13, 2020 2:05 pm
Profile
Site Supporter
User avatar
Site Supporter

Location: Olympia
Joined: Sun Feb 3, 2013
Posts: 46
Post some picks of your rifle would you. As for rechamber...shoot 7.7 mm its a great round. If you post the serial etc., can tell you some about the rifle

Techdiver_6366 wrote:
Hello all,

I know this is a only topic but I recently picked up a arisaka type 99 and was wondering how your conversion went. I know you said you were going to use 7.62x39, I'm wanting to use 30-06 is this possible? Also could you please post some pictures of your insert already installed, ( assuming you still have the rifle ) thank you very much


Sun Sep 13, 2020 5:30 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 35 posts ]  Go to page Previous  1, 2, 3

Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum



Rent Me Pintos NRA SAF CCKRBA
Aldersons e-arms.com


Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.
[ Time : 0.792s | 14 Queries | GZIP : Off ]