WaGuns.org
https://www.waguns.org/

Printable Targets
https://www.waguns.org/viewtopic.php?f=68&t=101		 Page 2 of 3
Author:  old11bravo [ Sun Feb 09, 2014 8:38 pm ]
Post subject:  Re: Your work have a printer? Need targets?
Why, that would just be completely unethical to use my work printer!................................ I printed a few hundred.
Author:  golddigger14s [ Sun Feb 09, 2014 9:50 pm ]
Post subject:  Re: Your work have a printer? Need targets?
lamrith wrote:
printtargets.net/

The one issue I see with paper targets, is that they do not do well at making clean holes, and if you group well, it gets even worse as normal paper just tears. If possible print them on heavier paper or even cardstock to get nice crisp bullet holes.

I shoot Hi-Points, and AK's, if I start grouping close enough that the type of paper makes a difference well the angels have smiled upon me! :bigsmile:
Author:  Massivedesign [ Sun Feb 09, 2014 9:54 pm ]
Post subject:  Re: Your work have a printer? Need targets?
Moved to the often forgotten... Reference Section
Author:  MadPick [ Sun Feb 09, 2014 9:56 pm ]
Post subject:  Re: Your work have a printer? Need targets?
Massivedesign wrote:
Moved to the often forgotten... Reference Section


Why? The Reference Section already has a sticky on this subject.

http://waguns.org/viewtopic.php?f=68&t=101

:facepalm2:
Author:  Massivedesign [ Sun Feb 09, 2014 9:57 pm ]
Post subject:  Re: Your work have a printer? Need targets?
Then merge it dear admin dear admin dear admin...
Author:  MadPick [ Sun Feb 09, 2014 10:11 pm ]
Post subject:  Re: Your work have a printer? Need targets?
Massivedesign wrote:
Then merge it dear admin dear admin dear admin...


Fuuuuck. OK. But I seriously need to teach you how to do it one of these days, I'm tired of doing all this stuff myself.












:peep:
Author:  WAGunRights [ Mon Feb 10, 2014 10:52 am ]
Post subject:  Re: Printable Targets
You can also buy rite-in-rain printer paper to print targets on for the wet winter months. I have used it before with really good results. It's also think enough that it shows holes nice and clean.

Sent from my SAMSUNG Galaxy S3 using Tapatalk Pro
Author:  BadKarma [ Mon Feb 10, 2014 11:13 am ]
Post subject:  Re: Your work have a printer? Need targets?
MadPick wrote:
Massivedesign wrote:
Then merge it dear admin dear admin dear admin...


Fuuuuck. OK. But I seriously need to teach you how to do it one of these days, I'm tired of doing all this stuff myself.












:peep:

Admin fights are the BEST!
Author:  olydemon [ Mon Feb 10, 2014 11:48 am ]
Post subject:  Re: Your work have a printer? Need targets?
MadPick wrote:
Massivedesign wrote:
Then merge it dear admin dear admin dear admin...


Fuuuuck. OK. But I seriously need to teach you how to do it one of these days, I'm tired of doing all this stuff myself.












:peep:


I was actually testing you guys. TA said you both were getting soft on your duties..... :diggin:
Author:  TacticalAssault [ Mon Feb 10, 2014 12:06 pm ]
Post subject:  Re: Your work have a printer? Need targets?
olydemon wrote:
MadPick wrote:
Massivedesign wrote:
Then merge it dear admin dear admin dear admin...


Fuuuuck. OK. But I seriously need to teach you how to do it one of these days, I'm tired of doing all this stuff myself.












:peep:


I was actually testing you guys. TA said you both were getting soft on your duties..... :diggin:



Damn straight. Spongy soft. :thumbsdown:
Author:  san [ Tue Apr 07, 2015 1:36 pm ]
Post subject:  Re: Printable Targets
Zeroing Target – 50/200 Yard Zero at 10 Yards
Author:  lamrith [ Tue Apr 07, 2015 4:37 pm ]
Post subject:  Re: Printable Targets
san wrote:
Zeroing Target – 50/200 Yard Zero at 10 Yards


Nice. Just realize the distance from your scope centerline to bore centerline will affect your zero point as well.

I do a similar type of thing at home to boresight a rifle after adding a scope. I use 2.4" @ 10yrds, put a boresight laser in the gun, set it up and then dial the scope in to the other mark. only takes 1-2 shots at the range @25yrds to verify it is close and then I can go straight out to finish dial in actual zero and know I am on paper before I start.
Author:  golddigger14s [ Tue Apr 21, 2015 9:15 am ]
Post subject:  Re: Printable Targets
For Nikon scope owners:
Spoton
http://spoton.nikonsportoptics.com/spot ... ml#Index:4
Author:  golddigger14s [ Wed Nov 11, 2015 10:46 pm ]
Post subject:  Re: Printable Targets
https://www.freedommunitions.com/Free-T ... 58004.htm#
Author:  Ops [ Mon Mar 05, 2018 2:09 pm ]
Post subject:  free printable targets
for rmr users - http://arma-dynamics.com/assets/rmr-10yd-mod2.pdf

Mod Edit : Merged the thread "free printable targets" with the Printable Targets sticky thread.
Moved from "Good deals and hard-to-find items". :facepalm2: :ffight:

STEVE WAS HERE!
Page 2 of 3 All times are UTC - 8 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/