|
|
|
It is currently Thu Apr 18, 2024 4:22 am
|
Author |
Message |
The509busman
FFL / Dealer
Location: Pasco Washington Joined: Fri Nov 9, 2018 Posts: 406
Real Name: Scott
|
I have an idea for a reloading bench. I am just getting started rolling my own I think I am going to have a single 4x8 bench with a divider in the middle that would have peg board deviding it. the reason for the two sides is 1 side would house presses and all things dry and not powered the other side would be case prep, so wet tumbler case trimmer unprocessed brass ext. I tend to over think and over build what does the hive think of this idea? I basicallty have a single car garage area to work with. ( will keep powder in the house climate controled.)
|
Sun Jul 10, 2022 7:55 am |
|
|
MadPick
Site Admin
Location: Renton, WA Joined: Sun Mar 13, 2011 Posts: 52031
Real Name: Steve
|
I'm struggling with the concept of a physical divider between the two halves. Yes, maybe it would allow you to hang some tools there, but I feel like the wall would be a real pain in the butt, in that it won't allow you to work across that line.
For example, perhaps the first side has enough space for your press. But when you're reloading, you're also going to be using a powder scale, using space to reload primers, you'll have a jug of powder on the bench, etc. -- all things that are temporary. So it would be helpful, in my opinion, to be able to slide your tumblers, etc. to the side and "borrow" some of that space during the reloading process.
And likewise, if you are tumbling but not loading, you may want a little extra space for brass containers, etc.
So . . . my thought is that you're better off without a wall in the middle of the bench.
_________________SteveBenefactor Life Member, National Rifle AssociationLife Member, Second Amendment FoundationPatriot & Life Member, Gun Owners of AmericaLife Member, Citizens Committee for the Right to Keep and Bear ArmsLegal Action Supporter, Firearms Policy CoalitionMember, NAGR/NFGRPlease support the organizations that support all of us.Leave it cleaner than you found it.
|
Sun Jul 10, 2022 8:31 am |
|
|
jukk0u
Site Supporter
Location: Lynnwood and at large Joined: Wed May 1, 2013 Posts: 21260
Real Name: Vick Lagina
|
encumbering the middle of a single stall garage seems less than ideal, when wall space above the work area can house items needed for a particular task close at hand. While the CL item in the link below is pricey, I've wondered the utility of repurposed kitchen or shop equipment for such tasks. I also wonder if a top for presses could be set on top of such a fixture and slid to one side, or hoisted above (ceiling height restrictions?) to access the plumbed sink below. Obviously drainage of solvents and waste wouldn't be plumbed to sanitary sewer. https://yakima.craigslist.org/app/d/yak ... 25781.html
_________________ “Finding ‘common ground’ with the thinking of evil men is a fool’s errand” ~ Herschel Smith
"The said Constitution shall never be construed to authorize Congress to prevent the people of the United States who are peaceable citizens from keeping their own arms." ~ Samuel Adams
“A return to First Principles in a Republic is sometimes caused by simple virtues of a single man. His good example has such an influence that the good men strive to imitate him, and the wicked are ashamed to lead a life so contrary to his example. Before all else, be armed!” ~ Niccolo Machiavelli
Láodòng zhèng zhūwèi zìyóu
FJB
|
Sun Jul 10, 2022 8:33 am |
|
|
RocketScott
Site Supporter
Location: Kentucky Joined: Fri Jan 16, 2015 Posts: 11087
|
I have a 4x6 work table on casters. No center divider. In my shop in Tacoma I also had a 2’ deep workbench along the back wall with pegboard over it to hang tools on
Since I moved it’s in the carport of the house I’m renovating. I roll it out onto the driveway to work since there’s no lights in the carport
I’d say put pegboard on the wall. Park the bench under it and roll it out if you need to. The divider isn’t such a bad idea though. When I could leave stuff on mine it tended to get a divider of supplies down the middle
_________________ You may be right, I may be crazy, but it just may be a lunatic you're looking for
|
Sun Jul 10, 2022 10:52 am |
|
|
The509busman
FFL / Dealer
Location: Pasco Washington Joined: Fri Nov 9, 2018 Posts: 406
Real Name: Scott
|
My reasoning behind the devider was my press /loading side would not need power nor would I want water or brass shavings( cutting 223 iint 300 bo).I think at 2 foot x 8 foot on each side it would leave me plenty of room (maybe) Framing the divider with a 2x6 frame would build a kind of cabinet i could add shelves to . You all bring up good points though. i need to finish the shed then i can reclaim the gfarage ! thank you. The stainless sink looked cool but i would probably end up cutting the front out of the sinks to use as open storage but looks like more work than i want.
|
Mon Jul 11, 2022 7:44 pm |
|
|
beckdw
Site Supporter
Location: Tri -Cities Joined: Thu May 23, 2013 Posts: 2798
Real Name: David
|
Scott, I think you are on the right track.
I have my loading and processing setups segregated. I load in my bat cave on a 2x4' table anchored to the wall for stability. I have an electronic powder measure, Lee powder dispenser, single stage machine, and Dillon 550B set up there and its a little cramped. In the garage I have part of my work bench set aside for my vice for building guns, Lee APP for depriming/sizing, Frankfort prep center, and wet tumbler underneath the bench.
With your 2x8' bench I would lean more 60/40 weighted toward loading area. Having a divider wouldn't be bad to keep brass chips from cutting/sizing getting all over is a good idea. I would recommend keeping it on the smaller size so it is easier to work around. I would keep and run the tumbler under your bench in case of leaks.
|
Tue Jul 12, 2022 6:09 pm |
|
|
NWGunner
Site Supporter
Location: South Seattle Joined: Thu May 2, 2013 Posts: 12475
Real Name: Steve
|
If you weren’t going to hang tools from it, you could perhaps make it a removable divider.
|
Tue Jul 12, 2022 6:48 pm |
|
|
Caveman Jim
Site Supporter
Location: In my Cave near the Cloquallum Joined: Thu Sep 26, 2013 Posts: 7788
Real Name: Jim Sr.
|
I have two separate work areas in my shop. The back is 24 x 30 that I do all my dirty work like woodworking, brass cleaning, storage and prep work. Most is on a 4’x8’x2” solid core door that’s also an out feed for my big table saw. I built a 10x12’ room for all my reloading/gun building and maintenance that stays between 58-65*. Dirty room Attachment: 0C851929-20C4-4A0F-B9D9-39EC5A797455.jpeg Clean room Attachment: F10EE86A-789A-491A-BBC2-D6D7204C9C87.jpeg
You do not have the required permissions to view the files attached to this post.
_________________"You are either with us...as Americans. Or, You are against us. There is no IN BETWEEN." ??? "We cannot negotiate with those who say, 'What's mine is mine, and what's yours is negotiable.'" JFK "Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety” -Ben Franklin MadPick wrote: I don't think you beat your children enough.
|
Sat Aug 06, 2022 9:47 am |
|
|
hartcreek
Location: Union Gap Joined: Sun Mar 27, 2016 Posts: 1722
Real Name: Randall Knapp
|
You are thinking way to big for a beginner. I have a dedicated small room outside under my roof where I had to put my clothes dryer. All you really need is one of those fold up adjustable benches to mount your press on. Many guys get along fine just using an old heavy desk in one of their rooms. If you are storing much powder you will need a fire rated storage container. I use a WW2 era galvanized military grain container I just dont latch the cam locks.
|
Sat Aug 06, 2022 7:56 pm |
|
|
MadPick
Site Admin
Location: Renton, WA Joined: Sun Mar 13, 2011 Posts: 52031
Real Name: Steve
|
hartcreek wrote: All you really need is one of those fold up adjustable benches to mount your press on. Yes, that will work -- I had my press on one for a couple of years when I lived in an apartment. Will it work really well? No. If you have the ability to do so, I would use a rock-solid bench for the press. It will make reloading easier.
_________________SteveBenefactor Life Member, National Rifle AssociationLife Member, Second Amendment FoundationPatriot & Life Member, Gun Owners of AmericaLife Member, Citizens Committee for the Right to Keep and Bear ArmsLegal Action Supporter, Firearms Policy CoalitionMember, NAGR/NFGRPlease support the organizations that support all of us.Leave it cleaner than you found it.
|
Sun Aug 07, 2022 5:56 am |
|
|
Sinus211
Site Moderator
Location: Marysville Joined: Thu Mar 22, 2012 Posts: 13503
Real Name: Mike
|
MadPick wrote: hartcreek wrote: All you really need is one of those fold up adjustable benches to mount your press on. Yes, that will work -- I had my press on one for a couple of years when I lived in an apartment. Will it work really well? No. If you have the ability to do so, I would use a rock-solid bench for the press. It will make reloading easier. I have an old 400lbs+ office desk for my reloading bench. The last thing you want is a wiggly bench when you’re really having to work your press.
_________________Licensed/Bonded/Insured Hardwood Floor Installer/Finisher http://www.hardwoodfloorsnw.com/
|
Sun Aug 07, 2022 9:59 am |
|
|
The509busman
FFL / Dealer
Location: Pasco Washington Joined: Fri Nov 9, 2018 Posts: 406
Real Name: Scott
|
Caveman Jim wrote: I have two separate work areas in my shop. The back is 24 x 30 that I do all my dirty work like woodworking, brass cleaning, storage and prep work. Most is on a 4’x8’x2” solid core door that’s also an out feed for my big table saw. I built a 10x12’ room for all my reloading/gun building and maintenance that stays between 58-65*. Dirty room Attachment: 0C851929-20C4-4A0F-B9D9-39EC5A797455.jpeg Clean room Attachment: F10EE86A-789A-491A-BBC2-D6D7204C9C87.jpeg Caveman has the idea !! For those that dont know I am an FFL and SOT I also do cerakote and the ocasional build. While I am new to reloading I have set myself up to jump in deep. I am building a new shed for all the non gun, non garagey crap ( bikes mowers ext). I have 3 garage bays to work with cerakote, sandblaster, any messy crap will happen on the big two bay side of the shop. and one bay will be strictly building clean room assembly reloading. I think I will have all the sorting tumbling ext on the dirty side and just stop trying to share 1 bench for clean and dirty. My crappy benches can stay on the dirty side and i can build a new super solid bench I am looking at alot of those t tracks set ups on amazon that would make it very versitile. I appreciate all of the input and help my shed is going to get done in (hopefully)september ( waiting on a permit) then i can evaluate the space better and lay out what works
|
Sun Aug 07, 2022 6:31 pm |
|
|
The509busman
FFL / Dealer
Location: Pasco Washington Joined: Fri Nov 9, 2018 Posts: 406
Real Name: Scott
|
Well I did it kinda ish I think I like the results so far ish ... I added T track on the main part of the reloading side, the gun building/ assembling side is still in design phase more T track will go on the L shaped piece for my vice, anvil, and gun vice to swap out. so far im digging it.
You do not have the required permissions to view the files attached to this post.
|
Wed Feb 01, 2023 4:44 pm |
|
|
SporkBoy
Site Supporter
Location: Deckerville Joined: Wed Jan 13, 2016 Posts: 2944
Real Name: Rob
|
Needs a visual barrier against the street.
_________________ “The Democrats are playing you for a political chump and if you vote for them, not only are you a chump, you are a traitor to your race.”-Malcolm X
|
Wed Feb 01, 2023 9:01 pm |
|
|
The509busman
FFL / Dealer
Location: Pasco Washington Joined: Fri Nov 9, 2018 Posts: 406
Real Name: Scott
|
SporkBoy wrote: Needs a visual barrier against the street. Naw I am an FFL so if people see me doing gun stuff i can write it all of as advertising LOL
|
Thu Feb 02, 2023 9:43 pm |
|
|
|
Who is online |
Users browsing this forum: No registered users and 29 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|