Switch to full style
Post up your tips, tricks, load data and setups here.
Post a reply

Fix for the RCBS Loadmaster; No Straws Required

Sat Oct 19, 2019 7:10 am

RCBS has come out with a new high-zoot automated powder thrower called the Match Master. You guys can ditch the plactis straw (maybe?)

Oh yeah, and a new "e-commerce" website:

https://www.ammoland.com/2019/10/rcbs-i ... z62oR9sst4

Re: Fix for the RCBS Loadmaster; No Straws Required

Sat Oct 19, 2019 7:16 am

Its about time someone did a twin tube design. And I'll be very curious what the price will end up being.

Re: Fix for the RCBS Loadmaster; No Straws Required

Sat Oct 19, 2019 8:22 am

I get anal over .1gn difference.. this one goes to .10!! So find a good load at .1 then finish with .03 increments. Though its such a small change I dont know if it would have any actual bearing on accuracy.

Re: Fix for the RCBS Loadmaster; No Straws Required

Sat Oct 19, 2019 8:34 am

acidfly wrote:I get anal over .1gn difference.. this one goes to .10!! So find a good load at .1 then finish with .03 increments. Though its such a small change I dont know if it would have any actual bearing on accuracy.


Maybe on smaller cabilbers like 223 or 224valkyrie when your trying to stretch them out. Or on magnum handgun loads.

Re: Fix for the RCBS Loadmaster; No Straws Required

Sat Oct 19, 2019 10:44 am

I doubt that any of you have tried to weigh gunpowder down to 1/100 of a grain. Are you going to use your pocket knife to slice kernals in half. Weigh out some powder down to 1/10 and see how little that is.

Re: Fix for the RCBS Loadmaster; No Straws Required

Sat Oct 19, 2019 12:17 pm

RCBS, the leading manufacturer of ammunition reloading equipment for rifles and pistols, announced today that it has launched a new and improved website at www.rcbs.com that enables visitors with direct access to over 1,5000 of the company’s industry leading products.


Wow, that's a lot of products.

I'm not sure exactly how many, but it's a lot.

Re: Fix for the RCBS Loadmaster; No Straws Required

Sat Oct 19, 2019 3:23 pm

MadPick wrote:
RCBS, the leading manufacturer of ammunition reloading equipment for rifles and pistols, announced today that it has launched a new and improved website at http://www.rcbs.com that enables visitors with direct access to over 1,5000 of the company’s industry leading products.


Wow, that's a lot of products.

I'm not sure exactly how many, but it's a lot.


:ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO:

I wonder when these will be available to buy.
You know I need one...Not really but what the hell.... :bigsmile:

Re: Fix for the RCBS Loadmaster; No Straws Required

Sat Oct 19, 2019 3:53 pm

And now the bad news:
How much will it COST? RCBS has not officially released an MSRP, but we’re told the list MSRP could be $899.00, with a “street price” around $770.00.

http://bulletin.accurateshooter.com/2019/10/new-matchmaster-twin-tube-powder-dispenserscale-from-rcbs

Re: Fix for the RCBS Loadmaster; No Straws Required

Sat Oct 19, 2019 4:16 pm

Ya thats not gonna fly... Maybe they will make a lite version without the blue tooth, and .004 accuracy.

Re: Fix for the RCBS Loadmaster; No Straws Required

Sat Oct 19, 2019 4:50 pm

gunblaster wrote:And now the bad news:
How much will it COST? RCBS has not officially released an MSRP, but we’re told the list MSRP could be $899.00, with a “street price” around $770.00.

http://bulletin.accurateshooter.com/2019/10/new-matchmaster-twin-tube-powder-dispenserscale-from-rcbs


With all of the $$$$ I have tied up in this "sport/hobby"....what's another $900... :bigsmile: :bigsmile:
After all, it is still cheaper then buying another NightForce.

Re: Fix for the RCBS Loadmaster; No Straws Required

Sat Oct 19, 2019 6:12 pm

Nitro_Guns wrote:
gunblaster wrote:And now the bad news:
How much will it COST? RCBS has not officially released an MSRP, but we’re told the list MSRP could be $899.00, with a “street price” around $770.00.

http://bulletin.accurateshooter.com/2019/10/new-matchmaster-twin-tube-powder-dispenserscale-from-rcbs


With all of the $$$$ I have tied up in this "sport/hobby"....what's another $900... :bigsmile: :bigsmile:
After all, it is still cheaper then buying another NightForce.


You're so full of shit . . . implying that if you buy this, you won't buy another Nightforce. :ROFLMAO:

Re: Fix for the RCBS Loadmaster; No Straws Required

Sat Oct 19, 2019 6:43 pm

MadPick wrote:
Nitro_Guns wrote:
gunblaster wrote:And now the bad news:
How much will it COST? RCBS has not officially released an MSRP, but we’re told the list MSRP could be $899.00, with a “street price” around $770.00.

http://bulletin.accurateshooter.com/2019/10/new-matchmaster-twin-tube-powder-dispenserscale-from-rcbs


With all of the $$$$ I have tied up in this "sport/hobby"....what's another $900... :bigsmile: :bigsmile:
After all, it is still cheaper then buying another NightForce.


You're so full of shit . . . implying that if you buy this, you won't buy another Nightforce. :ROFLMAO:


:ROFLMAO: :ROFLMAO:

Well there is that..... :bigsmile: :bigsmile:
Post a reply