Author |
Message |
snozzberries
Site Supporter
Location: King County Joined: Thu Oct 16, 2014 Posts: 4012
|
I taper crimped my .45acp. My 45 long colt needs a roll crimp. How much? Do you measure it? Just eyeball it? I can't seem to find specs anywhere. My reloading manual doesn't specify, neither do the dies.
|
Fri Jan 25, 2019 9:10 pm |
|
|
MadPick
Site Admin
Location: Renton, WA Joined: Sun Mar 13, 2011 Posts: 52022
Real Name: Steve
|
Personally I eyeball it, and make sure they load smoothly into the cylinder.
_________________SteveBenefactor Life Member, National Rifle AssociationLife Member, Second Amendment FoundationPatriot & Life Member, Gun Owners of AmericaLife Member, Citizens Committee for the Right to Keep and Bear ArmsLegal Action Supporter, Firearms Policy CoalitionMember, NAGR/NFGRPlease support the organizations that support all of us.Leave it cleaner than you found it.
|
Fri Jan 25, 2019 9:17 pm |
|
|
lionhrt
Site Supporter
Location: Skagit county Joined: Sat Apr 21, 2012 Posts: 1389
Real Name: Dave
|
I eye ball it and then i push the tip against the edge of the bench and push to make sure it does not shift and then i check to make sure it chambers properly
_________________kf7mjf wrote: WaGuns Clue.
It was a Night Op in the library with an AK Pistol by TW...
|
Fri Jan 25, 2019 9:47 pm |
|
|
usrifle
Site Supporter
Location: RENTON Joined: Fri Mar 25, 2011 Posts: 20771
Real Name: John
|
Go to Google. Type in "Rollcrimp" Watch videos, read articles, roll crimp your way to revolver Cartridge happiness.
_________________ Mr. Q wrote: so basically, if you have to smoke some asshole, make sure they become fertilizer and then Bounce? got it.
Guntrader wrote: Huh, maybe I was an asshole.
NRA Member/RSO SAF 5 Year Donor GOA Member
|
Fri Jan 25, 2019 10:31 pm |
|
|
hartcreek
Location: Union Gap Joined: Sun Mar 27, 2016 Posts: 1722
Real Name: Randall Knapp
|
I roll crimp all my pistol calibers including semi auto. Rimmed cartridges are easy.
|
Fri Jan 25, 2019 11:39 pm |
|
|
usrifle
Site Supporter
Location: RENTON Joined: Fri Mar 25, 2011 Posts: 20771
Real Name: John
|
hartcreek wrote: I roll crimp all my pistol calibers including semi auto. Rimmed cartridges are easy. Right...but since he couldn't find a "Spec" for the roll crimp, that's where his issue comes into play. You know it's easy, i know it's easy, he doesn't know it's easy and he's hung up on a having some sort of measurement or spec for it. Hence why i suggested he Google it and watch some video's and see for himself it's simple and easy.
_________________ Mr. Q wrote: so basically, if you have to smoke some asshole, make sure they become fertilizer and then Bounce? got it.
Guntrader wrote: Huh, maybe I was an asshole.
NRA Member/RSO SAF 5 Year Donor GOA Member
|
Sat Jan 26, 2019 12:41 am |
|
|
snozzberries
Site Supporter
Location: King County Joined: Thu Oct 16, 2014 Posts: 4012
|
Thanks for the answers. I just eyeballed it and they seem to be working fine.
|
Sat Jan 26, 2019 2:12 pm |
|
|
Tank674
Site Supporter
Location: Rainier Joined: Sun Mar 8, 2015 Posts: 335
|
lionhrt wrote: I eye ball it and then i push the tip against the edge of the bench and push to make sure it does not shift and then i check to make sure it chambers properly This... Then when at the range, I load the cylinder , fire off a couple rounds, then check a couple others remaining in cylinder for signs of extension or set-back- This is especially true when loading rounds for my .45colt lever gun...lever a round or 2 out and check the oal
|
Sat Jan 26, 2019 2:37 pm |
|
|
snozzberries
Site Supporter
Location: King County Joined: Thu Oct 16, 2014 Posts: 4012
|
Tank674 wrote: lionhrt wrote: I eye ball it and then i push the tip against the edge of the bench and push to make sure it does not shift and then i check to make sure it chambers properly This... Then when at the range, I load the cylinder , fire off a couple rounds, then check a couple others remaining in cylinder for signs of extension or set-back- This is especially true when loading rounds for my .45colt lever gun...lever a round or 2 out and check the oal I loaded up 13, shot 1, shot 2, shot 10. Loaded up 100 when I came home. I'll take the calipers next time I head out and check the ones in the tube.
|
Sat Jan 26, 2019 5:12 pm |
|
|
STED9R
Site Supporter
Location: Puyallup Joined: Thu Jul 5, 2012 Posts: 3065
Real Name: Glenn(sted)
|
I load my 45 Colt light, think cowboy competition shooting. I've found that the 45 Colt with a large case and not dropping a lot of powder in it likes a good hard crimp. Thhhaattt being said, I don't use jacketed or plated bullets, hard cast only. I don't trim the brass, any pistol brass, never have in 41 years, although on occasion will get bored and sort through thousands of pieces of 45 auto brass for ones that have been fired so many times they are more than long, but that only happens every few years. Over the years I've gotten a pretty accurate feel how much crimp I'm getting on a single stage, regardless of length of brass. I'd never try it on my Dillon. I'm not out for moa accuracy on a 45LC, if it's a longer than specs a bit, ain't hurting a thing. Read, watch and learn. More importantly, practice and get a feel by what is to much or too little. To little crimp, primer launches round into barrel and burns half the powder leaving round stuck, or dropping 10' in front of you, to much crimp and bullet goes out just fine but more wear on brass, way too much and you turn the round into an accordion. Just perfect by way of practice, you hit the mark.
|
Sun Jan 27, 2019 8:50 pm |
|
|
snozzberries
Site Supporter
Location: King County Joined: Thu Oct 16, 2014 Posts: 4012
|
I'm using plated bullets. I'll keep in mind the details you spelled out. Thanks for the info. I'm also not putting a lot of powder in, they are pretty light loads. Same amount of powder i put in my 45ACP actually. The manuals said this was the starting load for cowboy loads, and now I don't have to adjust the powder thrower.
|
Mon Jan 28, 2019 10:41 am |
|
|
|