WaGuns.org https://www.waguns.org/ |
|
100 % lowers https://www.waguns.org/viewtopic.php?f=94&t=26618 |
Page 1 of 1 |
Author: | WMA [ Wed Jul 17, 2013 4:52 pm ] |
Post subject: | 100 % lowers |
GUN SHOP CLOSED |
Author: | spikedzombies [ Wed Jul 17, 2013 6:23 pm ] |
Post subject: | Re: 80% lowers |
WMA wrote: Billet 6061 and 7075 80% AR lowers for sale http://www.wynakosmachine.com It would help if you listed prices and a working link. Your Website has no information on these at all. |
Author: | MFTIC [ Thu Jul 18, 2013 2:31 pm ] |
Post subject: | Re: 80% lowers |
Website does suck. On the plus side... link works in his sig, prices and pictures(bad ones) are there ($160 and $50), answers phone quickly, and very knowledgeable. Quite the talker and sounds like they are ready to rock. I have a buddy that's going to stop in there next week. (treat him right and i'll be down next ) *now if they would only let you finish other lowers on their CNC (the one they have wasn't my favorite aesthetically) I'd be down there sooner. **Feel free to delete this post if I'm stepping on toes. |
Author: | spikedzombies [ Thu Jul 18, 2013 6:41 pm ] |
Post subject: | Re: 80% lowers |
MFTIC wrote: Website does suck. On the plus side... link works in his sig, prices and pictures(bad ones) are there ($160 and $50), answers phone quickly, and very knowledgeable. Quite the talker and sounds like they are ready to rock. I have a buddy that's going to stop in there next week. (treat him right and i'll be down next ) *now if they would only let you finish other lowers on their CNC (the one they have wasn't my favorite aesthetically) I'd be down there sooner. **Feel free to delete this post if I'm stepping on toes. actually The Billet 6061 is $160, and the 7075 is $190 .. the $50 is the use of their machinery to finish it at their shop. |
Author: | WMA [ Wed Sep 18, 2013 3:51 pm ] |
Post subject: | Re: |
MFTIC wrote: Website does suck. On the plus side... link works in his sig, prices and pictures(bad ones) are there ($160 and $50), answers phone quickly, and very knowledgeable. Quite the talker and sounds like they are ready to rock. I have a buddy that's going to stop in there next week. (treat him right and i'll be down next ) *now if they would only let you finish other lowers on their CNC (the one they have wasn't my favorite aesthetically) I'd be down there sooner. **Feel free to delete this post if I'm stepping on toes. |
Author: | Chrisb9381 [ Thu Sep 19, 2013 7:06 am ] |
Post subject: | Re: 80% lowers |
tag for later |
Author: | mash man [ Thu Sep 19, 2013 7:34 am ] |
Post subject: | Re: 80% lowers |
Chrisb9381 wrote: tag for later same |
Author: | leifglock [ Fri Jan 03, 2014 5:06 pm ] |
Post subject: | Re: 80% lowers |
Aaron, I just spoke with Mike. He mentioned I actually need to pick-up my lower from James at 'Double Worlds'. But it seems the website address he gave me doesn't work. Can you verify this is the process and help me out? Thanks, Leif |
Page 1 of 1 | All times are UTC - 8 hours |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |