WaGuns.org
https://www.waguns.org/

100 % lowers
https://www.waguns.org/viewtopic.php?f=94&t=26618		 Page 1 of 1
Author:  WMA [ Wed Jul 17, 2013 4:52 pm ]
Post subject:  100 % lowers
GUN SHOP CLOSED
Author:  spikedzombies [ Wed Jul 17, 2013 6:23 pm ]
Post subject:  Re: 80% lowers
WMA wrote:
Billet 6061 and 7075 80% AR lowers for sale http://www.wynakosmachine.com


It would help if you listed prices and a working link. Your Website has no information on these at all.
Author:  MFTIC [ Thu Jul 18, 2013 2:31 pm ]
Post subject:  Re: 80% lowers
Website does suck.
On the plus side...
link works in his sig, prices and pictures(bad ones) are there ($160 and $50), answers phone quickly, and very knowledgeable.
Quite the talker and sounds like they are ready to rock.

I have a buddy that's going to stop in there next week. (treat him right and i'll be down next :ROFLMAO: )
*now if they would only let you finish other lowers on their CNC (the one they have wasn't my favorite aesthetically) I'd be down there sooner.

**Feel free to delete this post if I'm stepping on toes.
Author:  spikedzombies [ Thu Jul 18, 2013 6:41 pm ]
Post subject:  Re: 80% lowers
MFTIC wrote:
Website does suck.
On the plus side...
link works in his sig, prices and pictures(bad ones) are there ($160 and $50), answers phone quickly, and very knowledgeable.
Quite the talker and sounds like they are ready to rock.

I have a buddy that's going to stop in there next week. (treat him right and i'll be down next :ROFLMAO: )
*now if they would only let you finish other lowers on their CNC (the one they have wasn't my favorite aesthetically) I'd be down there sooner.

**Feel free to delete this post if I'm stepping on toes.


actually

The Billet 6061 is $160, and the 7075 is $190 .. the $50 is the use of their machinery to finish it at their shop.
Author:  WMA [ Wed Sep 18, 2013 3:51 pm ]
Post subject:  Re:
MFTIC wrote:
Website does suck.
On the plus side...
link works in his sig, prices and pictures(bad ones) are there ($160 and $50), answers phone quickly, and very knowledgeable.
Quite the talker and sounds like they are ready to rock.

I have a buddy that's going to stop in there next week. (treat him right and i'll be down next :ROFLMAO: )
*now if they would only let you finish other lowers on their CNC (the one they have wasn't my favorite aesthetically) I'd be down there sooner.

**Feel free to delete this post if I'm stepping on toes.
Author:  Chrisb9381 [ Thu Sep 19, 2013 7:06 am ]
Post subject:  Re: 80% lowers
tag for later
Author:  mash man [ Thu Sep 19, 2013 7:34 am ]
Post subject:  Re: 80% lowers
Chrisb9381 wrote:
tag for later


same :bigsmile:
Author:  leifglock [ Fri Jan 03, 2014 5:06 pm ]
Post subject:  Re: 80% lowers
Aaron,

I just spoke with Mike. He mentioned I actually need to pick-up my lower from James at 'Double Worlds'. But it seems the website address he gave me doesn't work. Can you verify this is the process and help me out?

Thanks,
Leif
Page 1 of 1 All times are UTC - 8 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/