Gun store Shooting Locations It is currently Mon Jul 13, 2020 1:40 pm


Rules Brads Guns Rainier Arms McCallen Killer Innovations Fessleman Firearms
WGO Chat Room Rehv Arms Vantage Reloading
Gear Fortis WCA 2A Ind. Pintos WAC
Calendar




Reply to topic  [ 14 posts ] 
 A tale of two scales... 
Author Message
Site Supporter
User avatar
Site Supporter

Location: In my Cave
Joined: Thu Sep 26, 2013
Posts: 2815
Real Name: Jim Sr.
Well maybe not a tale but how about a tell...

I’ve been using a Lyman D-7 scale for the last four years and while I believe I had it set up correctly I just do not trust it. When I say do not trust it is an afterthought when I recently came across an RCBS 1010. When I got it set up, adjusted and tested I tried it out with my 223 load in my Lee powder throw that was supposedly set at 23g IMR 3031.... we’ll it weren’t!!! It was actually 23.4g (if the RCBS1010 is right) ....

So in all of your infinite wisdom, which one do you think is the best, should I keep one as a back up or scrap em both and get another of better quality?

As always, thanks in advance. ;)

_________________
Since Clint went full retard I’ll no longer use his quotes!!!!

"You are either with us...as Americans. Or, You are against us. There is no IN BETWEEN." ???

"We cannot negotiate with those who say, 'What's mine is mine, and what's yours is negotiable.'" JFK

"Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety”

-Ben Franklin

MadPick wrote:
I don't think you beat your children enough. :ROFLMAO:


Mon Nov 04, 2019 8:00 pm
Profile
Site Supporter
User avatar
Site Supporter

Location: Port Orchard
Joined: Sun Dec 23, 2012
Posts: 634
Real Name: Josh
Precision trumps accuracy. If you work up your loads it doesn't matter if your scale is off a long as it's repeatable. Use whichever you like best!


Mon Nov 04, 2019 8:10 pm
Profile
User avatar

Location: Arlington wa
Joined: Wed Oct 12, 2011
Posts: 573
Verify the scales with check weights...


Mon Nov 04, 2019 8:22 pm
Profile
Site Supporter
User avatar
Site Supporter

Location: In my Cave
Joined: Thu Sep 26, 2013
Posts: 2815
Real Name: Jim Sr.
I was thinking along the same lines, I first have to know what is the right weight though. I’ll get a weight verified tomorrow, thanks.

_________________
Since Clint went full retard I’ll no longer use his quotes!!!!

"You are either with us...as Americans. Or, You are against us. There is no IN BETWEEN." ???

"We cannot negotiate with those who say, 'What's mine is mine, and what's yours is negotiable.'" JFK

"Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety”

-Ben Franklin

MadPick wrote:
I don't think you beat your children enough. :ROFLMAO:


Mon Nov 04, 2019 8:23 pm
Profile
User avatar

Location: Union Gap
Joined: Sun Mar 27, 2016
Posts: 1082
Real Name: Randall Knapp
the 1010 should have a weight that u can use as a check weight


Tue Nov 05, 2019 1:32 am
Profile
Site Supporter
User avatar
Site Supporter

Location: In my Cave
Joined: Thu Sep 26, 2013
Posts: 2815
Real Name: Jim Sr.
hartcreek wrote:
the 1010 should have a weight that u can use as a check weight


That is not a weight check, it is an auxiliary weight to ad capacity to 1,010 grains.

_________________
Since Clint went full retard I’ll no longer use his quotes!!!!

"You are either with us...as Americans. Or, You are against us. There is no IN BETWEEN." ???

"We cannot negotiate with those who say, 'What's mine is mine, and what's yours is negotiable.'" JFK

"Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety”

-Ben Franklin

MadPick wrote:
I don't think you beat your children enough. :ROFLMAO:


Tue Nov 05, 2019 8:59 am
Profile
User avatar

Location: Deckerville
Joined: Wed Jan 13, 2016
Posts: 1798
Real Name: Rob
1 ml of water is 1 gram. Got a pipetter?


Tue Nov 05, 2019 10:39 pm
Profile
Site Supporter
User avatar
Site Supporter

Location: In my Cave
Joined: Thu Sep 26, 2013
Posts: 2815
Real Name: Jim Sr.
SporkBoy wrote:
1 ml of water is 1 gram. Got a pipetter?


Thanks but no, I'll wait for the "No Error Deal". I've got a set of RCBS check weights coming this week. :bigsmile:

I'm going to set up the 10 10 and use it and probably sell the Lyman later on.
Thanks for all the feedback folks. :thumbsup2:

_________________
Since Clint went full retard I’ll no longer use his quotes!!!!

"You are either with us...as Americans. Or, You are against us. There is no IN BETWEEN." ???

"We cannot negotiate with those who say, 'What's mine is mine, and what's yours is negotiable.'" JFK

"Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety”

-Ben Franklin

MadPick wrote:
I don't think you beat your children enough. :ROFLMAO:


Tue Nov 05, 2019 11:44 pm
Profile
Site Supporter
User avatar
Site Supporter

Location: Skagit County, in the woods
Joined: Tue Apr 7, 2015
Posts: 562
Caveman Jim wrote:
hartcreek wrote:
the 1010 should have a weight that u can use as a check weight


That is not a weight check, it is an auxiliary weight to ad capacity to 1,010 grains.


If it's a known weight and within the range of your scale, it doesn't matter what it's called, it can be used for a check weight.


Wed Nov 06, 2019 7:16 pm
Profile
Site Supporter
User avatar
Site Supporter

Location: In my Cave
Joined: Thu Sep 26, 2013
Posts: 2815
Real Name: Jim Sr.
Yondering wrote:
Caveman Jim wrote:
hartcreek wrote:
the 1010 should have a weight that u can use as a check weight


That is not a weight check, it is an auxiliary weight to ad capacity to 1,010 grains.


If it's a known weight and within the range of your scale, it doesn't matter what it's called, it can be used for a check weight.


Thanks, but calibration with a 250g +/- weight, nah. I have a set of RCBS check weights coming so I’ll wait for the real deal.

_________________
Since Clint went full retard I’ll no longer use his quotes!!!!

"You are either with us...as Americans. Or, You are against us. There is no IN BETWEEN." ???

"We cannot negotiate with those who say, 'What's mine is mine, and what's yours is negotiable.'" JFK

"Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety”

-Ben Franklin

MadPick wrote:
I don't think you beat your children enough. :ROFLMAO:


Thu Nov 07, 2019 10:12 am
Profile
Site Supporter
User avatar
Site Supporter

Location: Skagit County, in the woods
Joined: Tue Apr 7, 2015
Posts: 562
Caveman Jim wrote:
Yondering wrote:
Caveman Jim wrote:
hartcreek wrote:
the 1010 should have a weight that u can use as a check weight


That is not a weight check, it is an auxiliary weight to ad capacity to 1,010 grains.


If it's a known weight and within the range of your scale, it doesn't matter what it's called, it can be used for a check weight.


Thanks, but calibration with a 250g +/- weight, nah. I have a set of RCBS check weights coming so I’ll wait for the real deal.


Scratching my head here about your objection. If that weight is intended to increase the capacity of the scale, it's just as accurate as the check weights. And there is nothing wrong with calibrating with a 250gr weight (unless you're using a scale that doesn't go that high, but the 1010 does).


Thu Nov 07, 2019 7:37 pm
Profile
User avatar

Location: Union Gap
Joined: Sun Mar 27, 2016
Posts: 1082
Real Name: Randall Knapp
My check weights are in grams so I just convert to grains after I have used my 1010 weight for a quick check. I have recalibrated analytical scales so a powder scale is easy.


Fri Nov 08, 2019 9:08 pm
Profile
Site Supporter
User avatar
Site Supporter

Location: In my Cave
Joined: Thu Sep 26, 2013
Posts: 2815
Real Name: Jim Sr.
Yondering wrote:
Caveman Jim wrote:
Yondering wrote:
Caveman Jim wrote:
hartcreek wrote:
the 1010 should have a weight that u can use as a check weight


That is not a weight check, it is an auxiliary weight to ad capacity to 1,010 grains.


If it's a known weight and within the range of your scale, it doesn't matter what it's called, it can be used for a check weight.


Thanks, but calibration with a 250g +/- weight, nah. I have a set of RCBS check weights coming so I’ll wait for the real deal.


Scratching my head here about your objection. If that weight is intended to increase the capacity of the scale, it's just as accurate as the check weights. And there is nothing wrong with calibrating with a 250gr weight (unless you're using a scale that doesn't go that high, but the 1010 does).


Just my personal preference is all. I received the check weights and the scale has been calibrated to my satisfaction. Thanks to all who posted comments. :thumbsup2:

Jim Sr.

_________________
Since Clint went full retard I’ll no longer use his quotes!!!!

"You are either with us...as Americans. Or, You are against us. There is no IN BETWEEN." ???

"We cannot negotiate with those who say, 'What's mine is mine, and what's yours is negotiable.'" JFK

"Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety”

-Ben Franklin

MadPick wrote:
I don't think you beat your children enough. :ROFLMAO:


Sat Nov 09, 2019 5:16 pm
Profile
User avatar

Location: Deckerville
Joined: Wed Jan 13, 2016
Posts: 1798
Real Name: Rob
Caveman Jim wrote:
SporkBoy wrote:
1 ml of water is 1 gram. Got a pipetter?


Thanks but no, I'll wait for the "No Error Deal". I've got a set of RCBS check weights coming this week. :bigsmile:

I'm going to set up the 10 10 and use it and probably sell the Lyman later on.
Thanks for all the feedback folks. :thumbsup2:


Was actually the method used to calibrate pipettes for FDA compliance.


Sun Nov 24, 2019 10:46 am
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 14 posts ] 

Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum



Rent Me Pintos NRA SAF CCKRBA
Aldersons e-arms.com


Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.
[ Time : 0.745s | 15 Queries | GZIP : Off ]