I wouldn't have done this if I would have been paying more, if I make the minimum payment over the 30 years it would save $68k. I rolled the balance of my house directly over without taking out any cash. So even though I added years, I plan on making a payment of several hundred more than the minimum each month so more will be going to the principal.

Last week we were told to stay home till the 7th, told there may be a possibility to be working from home till April 30th!

Traut

Major shout out to Traut for his kindness.

He went way out of his way to help me with something after a passing comment in a PM.

Much appreciated

With all the shit going on and we decided to buy a 3D printer now instead of later and now we're starting to get into making some PPE for the local health care facilities.



After some input from a friend that been doing the same for a while now, we had our first successful part

Bought my son a new (to him) car for his 18th birthday, 1995 Crown Vic LX.
Plus insurance, and a reserved carport in our apartment complex.
Hardest part was getting the carport. Hahaha
Must be 3x more cars than parking spots, especially with Boeing shutting down.
He ships out to Marine boot camp in August.
All he talks about.
True red, white, and blue, that kid.

Crown vic?

He'll fit right in here.

I actually bought it from a WA Guns member this morning. Hahaha
Keeping it in the WA Guns Family.

Outstanding work preventing contraception


Sent from my iPhone using Tapatalk

How much would you charge to print something like this?

https://cults3d.com/en/3d-model/tool/face-mask-frame

I'm literally on my second successful piece. LoL

I'll likely be doing masks after a while, but for now the simple face shield is what's on the menu, as I geared up for it first

Bought my oldest a 3d printer last year, I'll have him look him look into making those, I could use a few.
Any input you could provide would be appreciated.
I don't know shit about it.

There is a f****** ton of information just through a simple Google search.
a friend of mine is spearheading the Kitsap covid 19 ppe maker group on facebook, and there's info from tons of places on there too.
In the morning when I go back down I can post some of the info that I have on my computer down there.

We've got a file now to print three at a time flat to fill up most of the bed on the printer. And it prints the frame and the bottom reinforcement/shaper
somebody else already did to work so I don't have to I just import the file and print it.


So I've got a couple of friends that are both on the front line in healthcare and they'll be by sometime to pick up a couple shields today.
The rest of the production will probably go to St Joe's or Tacoma general or something.